Steiger Tiger III ST-470
Power
470 hp
Production
1980-1982
Engine
6-cylinder
Transmission
Allison CLT 5965
Weight
45360 lbs [20575 kg]
Drive
4WD
Introduction
Production Information of Steiger, Tiger III ST-470
The production information of the tractor (Tiger III ST-470) includes details about its manufacturing.
| Four-wheel Drive (4WD) tractor |
| Built in Fargo, North Dakota, USA |
| Manufacturer | Steiger |
|---|
Dimension and Tires Information of Steiger, Tiger III ST-470
This section sums up the dimension and tires information of the tractor.
| Raba K594 rear axle |
| Wheelbase | 150 inches [381 cm] |
|---|---|
| 96 inches*Fenders [243 cm] | |
| 60 inches*Cab [152 cm] | |
| Length | 289 inches [734 cm] |
| Weight | 45360 lbs [20575 kg] |
| 190.8 inches*Outer tires [484 cm] | |
| Width | 47 inches*Frame [119 cm] |
| Front axle | Raba K594 |
| Max weight | 50000 lbs [22680 kg] |
| Height | 161 inches [408 cm] |
| Ag front | 30.5x32 |
|---|---|
| Ag rear | 30.5x32 |
Engine Specifications of Steiger, Tiger III ST-470
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 6-cylinder |
| The 470 horsepower Cummins engine was available in early versions of the Steiger ST-450. Later, this version became the ST-470 due to its higher power. |
| Image courtesy of Hammerstrap Industries |
| Coolant capacity | 112 qts [106.0 L] |
|---|---|
| Oil capacity | 76 qts [71.9 L] |
| Power | 470 hp [350.5 kW] |
| Idle RPM | 650-2350 |
| Rated RPM | 1700 *The KTA-1150 was rated at 1700 and 2100 RPM |
| Bore/Stroke | 6.25x6.25 inches [159 x 159 mm] |
| Compression | 15.5:1 |
| Displacement | 1150 ci [18.8 L] |
| Starter volts | 24 |
| Torque RPM | 1500 |
| Torque | 1580 lb-ft [2142.5 Nm] |
Transmission Information of Steiger, Tiger III ST-470Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Power shift six-speed transmission with locking torque converter. Torque converter automatically locks when transmission side reaches 1700 RPM. |
| Transmission | Allison CLT 5965 |
|---|---|
| Type | Full power shift with torque converter |
| Gears | 6 forward and 1 reverse |
Mechanical Specs of Steiger, Tiger III ST-470Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Safari Cab standard with air-conditioning. |
| Articulated power steering |
| Hydraulic disc brakes |
Power Information of Steiger, Tiger III ST-470Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Https://www.tractordata.com/farm-tractors/001/0/2/1023-steiger-tiger-iii-st-470-tests.html |
Hydraulics Specifications of Steiger, Tiger III ST-470
Hydraulic system type, pressure, pump flow and valves.
| 25 gpm*Maximum [94.6 lpm] | |
| Type | Open center |
| Pump flow | 38 gpm [143.8 lpm] |
| Valves | 5 |
| Capacity | 48 gal [181.7 L] |
| SCV flow | 12 gpm*Minimum [45.4 lpm] |
| Pressure | 2250 psi [155.1 bar] |
Electrical System of Steiger, Tiger III ST-470
Battery voltage, charging system and ground.
| Charging system | Alternator |
|---|---|
| Battery volts | 12 |
| Battery CCA | 625 |
| Charging amps | 90 |
| Batteries | 4 |
Frequently asked questions
How much horsepower does the Steiger Tiger III ST-470 have?
The Steiger Tiger III ST-470 delivers 470 HP.
What years was the Steiger Tiger III ST-470 produced?
The Steiger Tiger III ST-470 was produced in 1980-1982.
What engine does the Steiger Tiger III ST-470 have?
The Steiger Tiger III ST-470 is powered by a 6-cylinder engine.
What transmission does the Steiger Tiger III ST-470 use?
The Steiger Tiger III ST-470 uses a Allison CLT 5965 transmission.
How much does the Steiger Tiger III ST-470 weigh?
The Steiger Tiger III ST-470 weighs 45360 lbs [20575 kg].
Is the Steiger Tiger III ST-470 4WD?
The Steiger Tiger III ST-470 is available in 4WD.