Introduction
Production Information of Valmet, 502
The production information of the tractor (502) includes details about its manufacturing.
| Utility tractor |
| Manufacturer | Valmet |
|---|
Dimension and Tires Information of Valmet, 502
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 19.7 inches [50 cm] |
|---|---|
| Wheelbase | 83.15 inches [211 cm] |
| Height (exhaust) | 103.2 inches [262 cm] |
| Height (cab) | 97.2 inches [246 cm] |
| Length | 135.2 inches [343 cm] |
| Front tread | 55.1/59.1/63/66.9 inches [139/150/160/169 cm] |
| Weight | 5500 lbs [2494 kg] |
| Width | 74.5 inches [189 cm] |
| Rear tread | 59.7/65/70.9/75.4 inches [151/165/180/191 cm] |
| Standard tires (ag) | Front: 7.50-16. Rear: 14.9-28 |
|---|---|
| Optional tires (ag) | Front: 10-16. Rear: 12.4-32 |
Engine Specifications of Valmet, 502
Get the specifications for the engine and if different options are available.
| Valmet 310 B |
| Liquid-cooled |
| Diesel |
| 3-cylinder 6-valve |
| Oil capacity | 6.75 qts [6.4 L] |
|---|---|
| Displacement | 163.8 ci [2.7 L] |
| Fuel system | Direct injection |
| Bore/Stroke | 3.937x4.488 inches [100 x 114 mm] |
| Starter volts | 12 |
| Rated RPM | 2300 |
| Power | 54 hp [40.3 kW] |
Transmission Information of Valmet, 502Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Three gears (1-3) plus reverse (R) in two ranges (low/high). |
| Type | Gear |
|---|---|
| Gears | 6 forward and 2 reverse |
| Clutch | 280mm dry disc |
Mechanical Specs of Valmet, 502Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Cab standard with heater. |
| Power steering |
| Mechanical disc brakes |
Power Information of Valmet, 502Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1720 |
Hydraulics Specifications of Valmet, 502
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 5.3 gal [20.1 L] |
|---|---|
| Pump flow | 11.1 gpm [42.0 lpm] |
Three-Point Hitch of Valmet, 502
Hitch category and rear/front lift capacity.
| Rear lift | 3,307 lbs [1500 kg] |
|---|
Frequently asked questions
How much horsepower does the Valmet 502 have?
The Valmet 502 delivers 54 HP.
What years was the Valmet 502 produced?
The Valmet 502 was produced in 1971-1982.
What engine does the Valmet 502 have?
The Valmet 502 is powered by a Diesel, 3-cylinder 6-valve engine.
What transmission does the Valmet 502 use?
The Valmet 502 uses a Gear transmission.
How much does the Valmet 502 weigh?
The Valmet 502 weighs 5500 lbs [2494 kg].
Is the Valmet 502 4WD?
The Valmet 502 is available in 2WD.