Introduction
Production Information of Valmet, 802
The production information of the tractor (802) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Valmet |
|---|
Dimension and Tires Information of Valmet, 802
This section sums up the dimension and tires information of the tractor.
| 2WD Weight | 7804 lbs [3539 kg] |
|---|---|
| 2WD Wheelbase | 92.1 inches [233 cm] |
| 2WD Width | 77.6 inches [197 cm] |
| 4WD Length | 163.4 inches [415 cm] |
| 4WD Wheelbase | 96.3 inches [244 cm] |
| 4WD Weight | 8730 lbs [3959 kg] |
| 4WD Width | 83.1 inches [211 cm] |
| 2WD Length | 151.2 inches [384 cm] |
| 4WD Ground clearance | 18.5 inches [46 cm] |
| 2WD Ground clearance | 18.9 inches [48 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9-34 |
|---|---|
| 4WD Standard tires (ag) | Front: 13.6-28. Rear: 18.4-34 |
Engine Specifications of Valmet, 802
Get the specifications for the engine and if different options are available.
| Liquid-cooled |
| 4-cylinder |
| Turbocharged diesel |
| Rated RPM | 2200 |
|---|---|
| Starter | Electric |
| Displacement | 268.5 ci [4.4 L] |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Power | 80.5 hp [60.0 kW] |
| Torque RPM | 1450 |
| Torque | 225.7 lb-ft [306.0 Nm] |
| Coolant capacity | 16.9 qts [16.0 L] |
| Oil capacity | 13.7 qts [13.0 L] |
| Starter volts | 12 |
Transmission Information of Valmet, 802Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) plus reverse (R) in two ranges (low/high). |
| Type | Synchromesh |
|---|---|
| Gears | 8 forward and 2 reverse |
| Clutch | 310mm disc |
Mechanical Specs of Valmet, 802Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Cab standard with heater. |
| Disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Valmet, 802Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@1556 |
Hydraulics Specifications of Valmet, 802
Hydraulic system type, pressure, pump flow and valves.
| Capacity | 6.1 gal [23.1 L] |
|---|---|
| Pressure | 3046 psi [210.0 bar] |
| Pump flow | 9.2 gpm [34.8 lpm] |
Three-Point Hitch of Valmet, 802
Hitch category and rear/front lift capacity.
| Rear lift | 6393 lbs [2899 kg] |
|---|
Electrical System of Valmet, 802
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery AH | 130 |
Frequently asked questions
How much horsepower does the Valmet 802 have?
The Valmet 802 delivers 80 HP.
What years was the Valmet 802 produced?
The Valmet 802 was produced in 1980-1983.
What engine does the Valmet 802 have?
The Valmet 802 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Valmet 802 use?
The Valmet 802 uses a Synchromesh transmission.
How much does the Valmet 802 weigh?
The Valmet 802 weighs 7804 lbs [3539 kg].
Is the Valmet 802 4WD?
The Valmet 802 is available in 2WD/4WD.