Valmet 8150
Power
123 hp
Production
1995-2002
Engine
SisuDiesel 620 DSRE, 6-cylinder
Transmission
HiTech
Weight
11220 lbs [5089 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Valmet, 8150
The production information of the tractor (8150) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Suolahti, Finland |
| Manufacturer | Valmet |
|---|
Dimension and Tires Information of Valmet, 8150
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 20.1 inches [51 cm] |
|---|---|
| Wheelbase | 100.7 inches [255 cm] |
| Height (exhaust) | 110.4 inches [280 cm] |
| Height (cab) | 110 inches [279 cm] |
| Length | 190.9 inches [484 cm] |
| Clearance (rear axle) | 19.7 inches [50 cm] |
| Weight | 11220 lbs [5089 kg] |
| Width | 85.8 inches [217 cm] |
| Ag front | 14.9R28 |
|---|---|
| Ag rear | 18.4R38 |
Engine Specifications of Valmet, 8150
Get the specifications for the engine and if different options are available.
| SisuDiesel 620 DSRE |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 402.6 ci [6.6 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 398 lb-ft [539.7 Nm] |
| Power | 123.4 hp [92.0 kW] |
Transmission Information of Valmet, 8150Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges with three-speed power shift and power shuttle. |
| Transmission | HiTech |
|---|---|
| Type | Three-speed power shift |
| Gears | 36 forward and reverse |
Mechanical Specs of Valmet, 8150Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard. |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Valmet, 8150Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| 540E@1539 | |
| Rear PTO | Independent |
| Engine RPM | 540@1874 |
| 1000 OptOptional | |
| Rear PTO Type | 540/1000 |
| 1000@2080 | |
| 540/540E OptOptional |
Hydraulics Specifications of Valmet, 8150
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2756 psi [190.0 bar] |
|---|---|
| Pump flow | 19.3 gpm [73.1 lpm] |
Three-Point Hitch of Valmet, 8150
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Rear lift | 15432 lbs [6999 kg] |
Electrical System of Valmet, 8150
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Valmet 8150 have?
The Valmet 8150 delivers 123 HP.
What years was the Valmet 8150 produced?
The Valmet 8150 was produced in 1995-2002.
What engine does the Valmet 8150 have?
The Valmet 8150 is powered by a SisuDiesel 620 DSRE, 6-cylinder engine.
What transmission does the Valmet 8150 use?
The Valmet 8150 uses a HiTech transmission.
How much does the Valmet 8150 weigh?
The Valmet 8150 weighs 11220 lbs [5089 kg].
Is the Valmet 8150 4WD?
The Valmet 8150 is available in 4WD.