Valmet 905 tractor

Valmet 905

Power

105 hp

Production

1984-1991

Engine

Diesel, 6-cylinder

Transmission

Synchromesh

Weight

9766 lbs [4429 kg]

Drive

4WD

From the same series:

805

Introduction

Production Information of Valmet, 905

The production information of the tractor (905) includes details about its manufacturing.

Row-Crop tractor
ManufacturerValmet

Dimension and Tires Information of Valmet, 905

This section sums up the dimension and tires information of the tractor.

Wheelbase100.8 inches [256 cm]
Weight9766 lbs [4429 kg]
Height106.5 inches [270 cm]
Length200.8 inches [510 cm]
Ground clearance18.7 inches [47 cm]
Width84.3 inches [214 cm]
Standard tires (ag)Front: 14.9-24. Rear: 18.4-34

Engine Specifications of Valmet, 905

Get the specifications for the engine and if different options are available.

Valmet D66D9
Liquid-cooled
6-cylinder
Diesel
Fuel systemDirect injection
Rated RPM2100
Displacement402.8 ci [6.6 L]
Bore/Stroke4.252x4.724 inches [108 x 120 mm]
Power105 hp [78.3 kW]
Compression17:1
Pre-heatingIntake air heater
Starter power4 hp [3.0 kW]
Starter volts12
StarterElectric

Transmission Information of Valmet, 905Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four synchronized gears (1-4) in two ranges (low/high) plus reverse range.
TypeSynchromesh
Gears8 forward and 4 reverse
Clutch330mm dry disc

Transmission variants 2

A push-button two-speed powershift added to the basic transmission.
TypeTwo-speed power shift
Gears16 forward and 8 reverse
8-speed synchromesh
16-speed two-speed power shift

Mechanical Specs of Valmet, 905Y

This section summarizes all mechanical information such as the brake system and other specifications.

Four-wheel drive
Cab standard. Optional air-conditioning.
Hydraulic wet disc brakes
Power steering
Differential lockElectro-hydraulic rear

Power Information of Valmet, 905Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type540/1000

Hydraulics Specifications of Valmet, 905

Hydraulic system type, pressure, pump flow and valves.

Pressure2611 psi [180.0 bar]
Pump flow12.7 gpm [48.1 lpm]

Three-Point Hitch of Valmet, 905

Hitch category and rear/front lift capacity.

Rear lift12590 lbs [5710 kg]

Electrical System of Valmet, 905

Battery voltage, charging system and ground.

GroundNegative
Battery AH150
Battery volts12
Charging systemAlternator
Charging amps65

Frequently asked questions

How much horsepower does the Valmet 905 have?

The Valmet 905 delivers 105 HP.

What years was the Valmet 905 produced?

The Valmet 905 was produced in 1984-1991.

What engine does the Valmet 905 have?

The Valmet 905 is powered by a Diesel, 6-cylinder engine.

What transmission does the Valmet 905 use?

The Valmet 905 uses a Synchromesh transmission.

How much does the Valmet 905 weigh?

The Valmet 905 weighs 9766 lbs [4429 kg].

Is the Valmet 905 4WD?

The Valmet 905 is available in 4WD.

Compare the Valmet 905 with another model