Valpadana 1650
Power
49 hp
Production
unknown
Engine
Diesel, 4-cylinder
Transmission
Shuttle
Weight
3,483 lbs [1579 kg]
Drive
4WD
Introduction
Production Information of Valpadana, 1650
The production information of the tractor (1650) includes details about its manufacturing.
| Built in San Martino, Italy |
| Manufacturer | Valpadana |
|---|
Dimension and Tires Information of Valpadana, 1650
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 71.65 inches [181 cm] |
|---|---|
| Weight | 3,483 lbs [1579 kg] |
| Height | 93.31 inches [237 cm] |
| Length | 134.6 inches [341 cm] |
| Ground clearance | 15.94 inches [40 cm] |
| Width | 54.53 inches [138 cm] |
| Ag front | 280/70-16 |
|---|---|
| Ag rear | 360/70-20 |
Engine Specifications of Valpadana, 1650
Get the specifications for the engine and if different options are available.
| 4TNE88-ELAN |
| Liquid-cooled |
| Diesel |
| 4-cylinder |
| Torque RPM | 1600 |
|---|---|
| Displacement | 133.6 ci [2.2 L] |
| Air cleaner | Dry |
| Bore/Stroke | 3.465x3.543 inches [88 x 90 mm] |
| Torque | 102.2 lb-ft [138.6 Nm] |
| Rated RPM | 2800 |
| Power | 49.5 hp [36.9 kW] |
Transmission Information of Valpadana, 1650Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 2
| Transmission | Shuttle/creeper |
|---|---|
| Gears | 16 forward and reverse |
Transmission variants 3
| Transmission | Hydrostatic |
|---|---|
| Gears | Infinite 3-range forward and reverse |
| 12-speed |
| 16-speed |
Mechanical Specs of Valpadana, 1650Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Wet disc brakes |
| Cab with heat and air conditining optional |
Power Information of Valpadana, 1650Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO Type | 540/750/ground |
|---|---|
| Front PTO Type | 1000 |
| Front PTO | Optional |
| Mid PTO | Optional |
| Mid PTO Type | 2000 |
Hydraulics Specifications of Valpadana, 1650
Hydraulic system type, pressure, pump flow and valves.
| Valves | 3 rear |
|---|---|
| Steering flow | 5.2 gpm [19.7 lpm] |
| Total flow | 12.6 gpm [47.7 lpm] |
| 1 front optional | |
| Pump flow | 7.4 gpm [28.0 lpm] |
Three-Point Hitch of Valpadana, 1650
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Front lift | 881.8 lbs [399 kg] |
| Rear lift | 2,646 lbs [1200 kg] |
| Front Hitch | I optional |
Frequently asked questions
How much horsepower does the Valpadana 1650 have?
The Valpadana 1650 delivers 49 HP.
What years was the Valpadana 1650 produced?
The Valpadana 1650 was produced in unknown.
What engine does the Valpadana 1650 have?
The Valpadana 1650 is powered by a Diesel, 4-cylinder engine.
What transmission does the Valpadana 1650 use?
The Valpadana 1650 uses a Shuttle transmission.
How much does the Valpadana 1650 weigh?
The Valpadana 1650 weighs 3,483 lbs [1579 kg].
Is the Valpadana 1650 4WD?
The Valpadana 1650 is available in 4WD.