
Valtra 8050Hi
Power
118 hp
Production
2003-2004
Engine
SisuDiesel 66 ET, 6-cylinder
Transmission
HiTech
Weight
11023 lbs [5000 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Valtra, 8050Hi
The production information of the tractor (8050Hi) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Suolahti, Finland |
| Manufacturer | Valtra (a part of AGCO) |
|---|
Dimension and Tires Information of Valtra, 8050Hi
This section sums up the dimension and tires information of the tractor.
| Clearance (front axle) | 21.9 inches [55 cm] |
|---|---|
| Wheelbase | 100.7 inches [255 cm] |
| Height (exhaust) | 111.8 inches [283 cm] |
| Height (cab) | 111.4 inches [282 cm] |
| Length | 190.9 inches [484 cm] |
| Clearance (rear axle) | 20.1 inches [51 cm] |
| Weight | 11023 lbs [5000 kg] |
| Width | 88.2 inches [224 cm] |
| Standard tires (ag) | Front: 16.9R28. Rear: 20.8R38 |
|---|
Engine Specifications of Valtra, 8050Hi
Get the specifications for the engine and if different options are available.
| SisuDiesel 66 ET |
| Liquid-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Starter | Electric |
|---|---|
| Displacement | 402.5 ci [6.6 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.25x4.72 inches [108 x 120 mm] |
| Starter volts | 12 |
| Torque RPM | 1400 |
| Torque | 372.5 lb-ft [505.1 Nm] |
| Power | 118 hp [88.0 kW] |
Transmission Information of Valtra, 8050HiY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears in three ranges with three-speed power shift and power shuttle. |
| Transmission | HiTech |
|---|---|
| Clutch | Wet disc |
| Type | Three-speed power shift |
| Gears | 36 forward and reverse |
Mechanical Specs of Valtra, 8050HiY
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Power steering |
| Hydraulic wet disc brakes |
Power Information of Valtra, 8050HiY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000 OptOptional | |
| Rear PTO Type | 540/1000 |
| 540/540E OptOptional |
Hydraulics Specifications of Valtra, 8050Hi
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 2756 psi [190.0 bar] |
|---|---|
| Pump flow | 19.3 gpm [73.1 lpm] |
Three-Point Hitch of Valtra, 8050Hi
Hitch category and rear/front lift capacity.
| Rear Type | III |
|---|---|
| Rear lift | 15432 lbs [6999 kg] |
Electrical System of Valtra, 8050Hi
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 184 |
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Valtra 8050Hi have?
The Valtra 8050Hi delivers 118 HP.
What years was the Valtra 8050Hi produced?
The Valtra 8050Hi was produced in 2003-2004.
What engine does the Valtra 8050Hi have?
The Valtra 8050Hi is powered by a SisuDiesel 66 ET, 6-cylinder engine.
What transmission does the Valtra 8050Hi use?
The Valtra 8050Hi uses a HiTech transmission.
How much does the Valtra 8050Hi weigh?
The Valtra 8050Hi weighs 11023 lbs [5000 kg].
Is the Valtra 8050Hi 4WD?
The Valtra 8050Hi is available in 4WD.