Valtra Q285
Power
281 hp
Production
2022+
Engine
Turbocharged intercooled diesel, 6-cylinder
Transmission
Continuously-variable transmission
Weight
20283 lbs [9200 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Valtra, Q285
The production information of the tractor (Q285) includes details about its manufacturing.
| Row-Crop tractor |
| Manufacturer | Valtra (a part of AGCO) |
|---|
Dimension and Tires Information of Valtra, Q285
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 23.2 inches [58 cm] |
|---|---|
| Wheelbase | 120.1 inches [305 cm] |
| Operating weight | 20283 lbs [9200 kg] |
| Height (cab) | 131.4 inches [333 cm] |
| Length | 218.7 inches [555 cm] |
| Max weight | 35274 lbs [16000 kg] |
| Width | 100.4 inches [255 cm] |
| Standard tires (ag) | Front: 600/70R30. Rear: 710/70R42 |
|---|
Engine Specifications of Valtra, Q285
Get the specifications for the engine and if different options are available.
| AGCO Power 74 LFTN-D5 |
| Liquid-cooled |
| 6-cylinder |
| Turbocharged intercooled diesel |
| Oil change | 600 h |
|---|---|
| Starter volts | 12 |
| Power | 281.6 hp [210.0 kW] |
| Idle RPM | 850-1950 |
| Rated RPM | 1950 |
| Displacement | 449.6 ci [7.4 L] |
| Emissions | Stage V |
| Maximum Power | 409 hp [305.0 kW] |
| Bore/Stroke | 4.25x5.28 inches [108 x 134 mm] |
| Starter | Electric |
| Torque RPM | 1500 |
| Torque | 944.1 lb-ft [1280.2 Nm] |
Transmission Information of Valtra, Q285Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Continuously-variable transmission |
|---|---|
| Gears | Infinite forward and reverse |
Mechanical Specs of Valtra, Q285Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Cab standard with air-conditioning. |
Power Information of Valtra, Q285Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO Type | 1000 |
|---|---|
| Rear PTO | Independent |
| 1000E@1605 | |
| 1000@1882 | |
| Rear PTO Type | 540E/1000E/1000 |
| Engine RPM | 1000@1900 |
| Front PTO | Independent OptOptional |
| Engine RPM | 540E@1577 |
Hydraulics Specifications of Valtra, Q285
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed-center load sensing |
|---|---|
| SCV flow | 31.7 gpm (standard) [120.0 lpm] |
| Pump flow | 52.8 gpm [199.8 lpm] |
| Rear valves | 4 or 5 |
| 37 gpm (highline) [140.0 lpm] | |
| Front valves | 2 to 4 |
Three-Point Hitch of Valtra, Q285
Hitch category and rear/front lift capacity.
| Rear lift | 21356 lbs [9687 kg] |
|---|---|
| Front lift | 9442 lbs [4282 kg] |
Electrical System of Valtra, Q285
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Valtra Q285 have?
The Valtra Q285 delivers 281 HP.
What years was the Valtra Q285 produced?
The Valtra Q285 was produced in 2022+.
What engine does the Valtra Q285 have?
The Valtra Q285 is powered by a Turbocharged intercooled diesel, 6-cylinder engine.
What transmission does the Valtra Q285 use?
The Valtra Q285 uses a Continuously-variable transmission transmission.
How much does the Valtra Q285 weigh?
The Valtra Q285 weighs 20283 lbs [9200 kg].
Is the Valtra Q285 4WD?
The Valtra Q285 is available in 4WD.