Yanmar SA426
Power
23 hp
Production
2025+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Drive
4WD
From the same series:
Introduction
Production Information of Yanmar, SA426
The production information of the tractor (SA426) includes details about its manufacturing.
| Compact Utility tractor |
| Built in Torbali, Turkey |
| Manufacturer | Yanmar |
|---|
Dimension and Tires Information of Yanmar, SA426
This section sums up the dimension and tires information of the tractor.
| Front tread | 37.8 inches [96 cm] |
|---|---|
| Wheelbase | 63 inches [160 cm] |
| Height (cab) | 85.2 inches [216 cm] |
| Height (ROPS) | 94.4 inches [239 cm] |
| Length | 110.4 inches [280 cm] |
| Rear tread | 42.5 inches [107 cm] |
| Ground clearance | 12.2 inches [30 cm] |
| Width | 56.5 inches [143 cm] |
| Lawn/turf front | 23x8.50-12 |
|---|---|
| Industrial front | 23x8.50-12 |
| Lawn/turf rear | 280/70R18 |
| Lawn/turf rear | 36x13.50-15 |
| Industrial rear | 14-17.5 |
| Lawn/turf front | 220/55R12 |
Engine Specifications of Yanmar, SA426
Get the specifications for the engine and if different options are available.
| Yanmar 3TNV76 |
| Liquid-cooled inline |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 68 ci [1.1 L] |
| Rated RPM | 3000 |
| Bore/Stroke | 2.99x3.23 inches [76 x 82 mm] |
| Coolant capacity | 3.5 qts [3.3 L] |
| Oil capacity | 3.6 qts [3.4 L] |
| Starter | Electric |
| Torque | 48 lb-ft [65.1 Nm] |
| Power (gross) | 23.4 hp [17.4 kW] |
Transmission Information of Yanmar, SA426Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 16.4 qts [15.5 L] |
Mechanical Specs of Yanmar, SA426Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. Cab optional with heat. |
| Power steering |
| Wet disc brakes |
Power Information of Yanmar, SA426Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Mid PTO Type | SAE 16/32 |
| Mid PTO | Independent |
| Clutch | 540:3120 |
| Engine RPM | 2000@3111 |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Yanmar, SA426
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 3.5 gpm [13.2 lpm] |
| Pump flow | 4 gpm [15.1 lpm] |
| Pressure | 2422 psi [167.0 bar] |
| Mid valves | 2 |
Three-Point Hitch of Yanmar, SA426
Hitch category and rear/front lift capacity.
| Rear Type | I (Limited) |
|---|---|
| Rear lift (at 24"/610mm) | 1208 lbs [547 kg] |
Electrical System of Yanmar, SA426
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Yanmar SA426 have?
The Yanmar SA426 delivers 23 HP.
What years was the Yanmar SA426 produced?
The Yanmar SA426 was produced in 2025+.
What engine does the Yanmar SA426 have?
The Yanmar SA426 is powered by a Diesel, 3-cylinder engine.
What transmission does the Yanmar SA426 use?
The Yanmar SA426 uses a Hydrostatic transmission.
Is the Yanmar SA426 4WD?
The Yanmar SA426 is available in 4WD.