Zetor 11050
Power
107 hp
Production
2008-2011
Engine
Turbocharged diesel, 4-cylinder
Transmission
Two-speed power shift
Weight
9030 lbs [4096 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Zetor, 11050
The production information of the tractor (11050) includes details about its manufacturing.
| Built in Brno, Czech Republic |
| Manufacturer | Zetor |
|---|
Dimension and Tires Information of Zetor, 11050
This section sums up the dimension and tires information of the tractor.
| Rear tread | 59 to 71 inches [149 to 180 cm] |
|---|---|
| Mech shuttle Wheelbase | 92 inches [233 cm] |
| Width | 78 inches*Minimum width [198 cm] |
| Power shuttle Length | 157 inches [398 cm] |
| Power shuttle Wheelbase | 96 inches [243 cm] |
| Power shuttle Weight | 9030 lbs [4096 kg] |
| Height (cab) | 106 inches [269 cm] |
| Mech shuttle Length | 153 inches [388 cm] |
| Front tread | 59 to 77 inches [149 to 195 cm] |
| Ground clearance | 18 inches [45 cm] |
| Mech shuttle Weight | 8600 lbs [3900 kg] |
| Standard tires (ag) | Front: 13.6R24. Rear: 18.4R34 |
|---|
Engine Specifications of Zetor, 11050
Get the specifications for the engine and if different options are available.
| Zetor |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 254 ci [4.2 L] |
| Power (gross) | 107 hp [79.8 kW] |
| Bore/Stroke | 4.13x4.72 inches [105 x 120 mm] |
| Starter | Electric |
| Rated RPM | 2200 |
| Power (net) | 101 hp [75.3 kW] |
Transmission Information of Zetor, 11050Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Synchronized transmission with two-speed push-button power shift and synchronized shuttle. |
| Type | Two-speed power shift |
|---|---|
| Gears | 16 forward and reverse |
| Clutch | 304.8mm hydraulic cerametallic disc |
Transmission variants 2
| Synchronized transmission with three-speed push-button power shift and power shuttle. Electric declutch button. |
| Type | Three-speed power shift |
|---|---|
| Gears | 24 forward and reverse |
| Clutch | Wet disc |
| 16-speed two-speed power shift |
| 24-speed three-speed power shift |
Mechanical Specs of Zetor, 11050Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-condtioning. |
| Differential lock | Mechanical rear |
|---|---|
| Limited-slip front |
Power Information of Zetor, 11050Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Electro-hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of Zetor, 11050
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Total flow | 20 gpm [75.7 lpm] |
| SCV flow | 14 gpm [53.0 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Steering flow | 6 gpm [22.7 lpm] |
| Valves | 3 |
Three-Point Hitch of Zetor, 11050
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| 9150 lbsOptOptional [4150 kg] | |
| Control | Position and draft control |
| Rear lift (at ends) | 7600 lbs [3447 kg] |
Electrical System of Zetor, 11050
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 950 |
| Charging volts | 12 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 95 |
Frequently asked questions
How much horsepower does the Zetor 11050 have?
The Zetor 11050 delivers 107 HP.
What years was the Zetor 11050 produced?
The Zetor 11050 was produced in 2008-2011.
What engine does the Zetor 11050 have?
The Zetor 11050 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Zetor 11050 use?
The Zetor 11050 uses a Two-speed power shift transmission.
How much does the Zetor 11050 weigh?
The Zetor 11050 weighs 9030 lbs [4096 kg].
Is the Zetor 11050 4WD?
The Zetor 11050 is available in 4WD.