Introduction
Production Information of Zetor, 9040
The production information of the tractor (9040) includes details about its manufacturing.
| Built in Brno, Czech Republic |
| Manufacturer | Zetor |
|---|
Dimension and Tires Information of Zetor, 9040
This section sums up the dimension and tires information of the tractor.
| Cab Weight | 8390 lbs [3805 kg] |
|---|---|
| Wheelbase | 89 inches [226 cm] |
| Height (cab) | 105 inches [266 cm] |
| Height (ROPS) | 105 inches [266 cm] |
| Length | 152 inches [386 cm] |
| Ground clearance | 17 inches [43 cm] |
| ROPS Weight | 7890 lbs [3578 kg] |
| Width | 73 inches*Minimum width [185 cm] |
| Rear tread | 56 to 71 inches [142 to 180 cm] |
| Front tread | 59 to 77 inches [149 to 195 cm] |
| Standard tires (ag) | Front: 12.4-24. Rear: 16.9-34 |
|---|
Engine Specifications of Zetor, 9040
Get the specifications for the engine and if different options are available.
| Zetor |
| Liquid-cooled |
| Turbocharged diesel |
| 4-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 254 ci [4.2 L] |
| Power (gross) | 93 hp [69.4 kW] |
| Bore/Stroke | 4.13x4.72 inches [105 x 120 mm] |
| Starter | Electric |
| Rated RPM | 2200 |
| Power (net) | 87 hp [64.9 kW] |
Transmission Information of Zetor, 9040Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Synchronized transmission with mechanical shuttle. |
| Type | Synchronized |
|---|---|
| Gears | 12 forward and reverse |
| Clutch | 304.8mm hydraulic cerametallic disc |
Mechanical Specs of Zetor, 9040Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Two-post folding ROPS. Cab optional with air-conditioning. |
| Differential lock | Mechanical rear |
|---|---|
| Limited-slip front |
Power Information of Zetor, 9040Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Clutch | Mechanical |
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Zetor, 9040
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 6 gpm [22.7 lpm] |
|---|---|
| Type | Open center |
| 17 gpmOptOptional [64.3 lpm] | |
| SCV flow | 14 gpm [53.0 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Total flow | 20 gpm [75.7 lpm] |
| Valves | 1 to 3 |
Three-Point Hitch of Zetor, 9040
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| 9150 lbsOptOptional [4150 kg] | |
| Control | Position and draft control |
| Rear lift (at ends) | 7600 lbs [3447 kg] |
Electrical System of Zetor, 9040
Battery voltage, charging system and ground.
| Battery volts | 12 |
|---|---|
| Ground | Negative |
| Charging volts | 12 |
| Cab Charging amps | 95 |
| Charging system | Alternator |
| Battery CCA | 950 |
| ROPS Charging amps | 55 |
Frequently asked questions
How much horsepower does the Zetor 9040 have?
The Zetor 9040 delivers 93 HP.
What years was the Zetor 9040 produced?
The Zetor 9040 was produced in 2008-2011.
What engine does the Zetor 9040 have?
The Zetor 9040 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the Zetor 9040 use?
The Zetor 9040 uses a Synchronized transmission.
How much does the Zetor 9040 weigh?
The Zetor 9040 weighs 8390 lbs [3805 kg].
Is the Zetor 9040 4WD?
The Zetor 9040 is available in 4WD.