Allis Chalmers 416 lawn tractor

Allis Chalmers 416

Power

16 hp

Production

1973

Transmission

Belt-driven shuttle

Weight

869 lbs (hydro) [394 kg]

Drive

2WD

From the same series:

414

Introduction

Production Information of Allis Chalmers, 416

The production information of the tractor (416) includes details about its manufacturing.

The Allis-Chalmers 416S was Simplicity model code 1600260 and the Allis-Chalmers 416H was model code 1600261. There was no corresponding Simpicity model, but these codes are used to identify parts and manuals in the Simplicity catalog.
Garden tractor
Built in Lexington, South Carolina, USA
ManufacturerAllis Chalmers

Dimension and Tires Information of Allis Chalmers, 416

This section sums up the dimension and tires information of the tractor.

Front tread30.7 inches [77 cm]
Wheelbase48.1 inches [122 cm]
Height (hood)39 inches [99 cm]
Height (steering wheel)43 inches [109 cm]
Length74 inches [187 cm]
Clearance (front axle)8 inches [20 cm]
Weight869 lbs (hydro) [394 kg]
Width38.5 inches [97 cm]
Rear tread28 inches [71 cm]
Clearance (drawbar)7.5 inches [19 cm]
Clearance (rear axle)6 inches [15 cm]
852 lbs (shuttle) [386 kg]
Lawn/turf front16-6.50x8
Lawn/turf rear23-10.50x12

Engine Specifications of Allis Chalmers, 416

Get the specifications for the engine and if different options are available.

Air-cooled
Power16 hp [11.9 kW]
Displacement588 cc [35.89 ci]
Oil capacity2 qts [1.9 L]
Air cleanerDry element
Bore/Stroke3.75x3.25 inches [95 x 83 mm]
Oil change25 h
Starter volts12
Rated RPM3600

Transmission Information of Allis Chalmers, 416Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Four speed transmission with right-hand shuttle lever. Tractor must be stopped to shift gears and shuttle lever in neutral, or the clutch/brake pedal fully depressed.
TypeBelt-driven shuttle
Gears4 forward and reverse
Oil capacity1.5 qts [1.4 L]

Transmission variants 2

4Gear shift
3Shuttle shift
1Throttle
2Clutch/brake

Transmission variants 3

TypeBelt-driven hydrostatic
GearsInfinite forward and reverse

Transmission variants 4

3Forward/reverse
1Throttle
2Clutch/brake
4-speed shuttle
Hydrostatic

Mechanical Specs of Allis Chalmers, 416Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two-wheel drive
Open operator station.
SteeringManual

Power Information of Allis Chalmers, 416Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOOptional
Front PTO Type3600
ClutchElectric
Rear PTO Type540
Front PTOIndependent

Electrical System of Allis Chalmers, 416

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Charging systemFlywheel alternator
Charging amps15

Frequently asked questions

How much horsepower does the Allis Chalmers 416 have?

The Allis Chalmers 416 delivers 16 HP.

What years was the Allis Chalmers 416 produced?

The Allis Chalmers 416 was produced in 1973.

What transmission does the Allis Chalmers 416 use?

The Allis Chalmers 416 uses a Belt-driven shuttle transmission.

How much does the Allis Chalmers 416 weigh?

The Allis Chalmers 416 weighs 869 lbs (hydro) [394 kg].

Is the Allis Chalmers 416 4WD?

The Allis Chalmers 416 is available in 2WD.

Compare the Allis Chalmers 416 with another model