Introduction
Cub Cadet 1710 Garden Tractor
The Cub Cadet 1710 is a garden tractor manufactured by Cub Cadet, a division of MTD, in Brownsville, Tennessee, USA. Produced during the mid-1980s, this model was designed for residential lawn maintenance and versatile property management tasks.
Engine and Performance
The tractor is powered by a 17 horsepower (12.7 kW) gasoline engine. It utilizes an air-cooled, opposed-twin cylinder configuration with a horizontal shaft and a displacement of 691 cc (42.18 ci). The fuel system operates via a carburetor, and the engine is started using a 12-volt electric starter system.
Transmission and Drive System
The 1710 features a shaft-driven hydrostatic transmission, allowing for infinite forward and reverse speed adjustments without the need for traditional gear shifting. It is configured as a two-wheel-drive machine, equipped with manual steering and disc brakes for operational control.
Power Take-Off and Attachments
This model is equipped with an independent front power take-off (PTO) engaged by an electric clutch, facilitating the use of various powered implements. The tractor is compatible with mower decks in 38, 44, and 50-inch sizes. Optional rear hitch configurations, including a sleeve hitch, are available for additional utility.
Dimensions and Chassis
The tractor rests on a 44-inch (111 cm) wheelbase with an overall length of 72 inches (182 cm). It features an open operator station and rides on lawn and turf tires, with 16x6.50-8 front tires and 23x10.50-12 rear tires. The shipping weight of the unit is approximately 700 lbs (317 kg).
Conclusion
The Cub Cadet 1710 is a durable garden tractor suited for landowners requiring a versatile machine for mowing and light utility work. Its hydrostatic transmission and independent front PTO make it a practical choice for tasks requiring frequent speed changes and powered implement operation.
Production Information of Cub Cadet, 1710
- Garden tractor
- Built in Brownsville, Tennessee, USA
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, 1710
| Wheelbase | 44 inches [111 cm] |
|---|---|
| Shipping weight | 700 lbs [317 kg] |
| Length | 72 inches [182 cm] |
| Height (steering wheel) | 43 inches [109 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Cub Cadet, 1710
- Air-cooled horizontal-shaft opposed-twin
- Gasoline
- 2-cylinder
| Power (gross) | 17 hp [12.7 kW] |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Fuel system | Carburetor |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Cub Cadet, 1710
Transmission variants 1
| Type | Shaft-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, 1710
- Two-wheel drive
- Open operator station.
- Manual steering
- Disc brakes
Power Information of Cub Cadet, 1710
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Three-Point Hitch of Cub Cadet, 1710
| Rear Type(optional) | 0 |
|---|---|
| Type(optional) | Sleeve hitch |
Electrical System of Cub Cadet, 1710
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 17 HP, the Cub Cadet 1710 sits just below 1810 (18 HP) in Cub Cadet's range. Its power puts it in the 82th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1710 have?
The Cub Cadet 1710 delivers 17 HP.
What years was the Cub Cadet 1710 produced?
The Cub Cadet 1710 was produced in 1985.
What engine does the Cub Cadet 1710 have?
The Cub Cadet 1710 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Cub Cadet 1710 use?
The Cub Cadet 1710 uses a Shaft-driven hydrostatic transmission.
How much does the Cub Cadet 1710 weigh?
The Cub Cadet 1710 weighs 700 lbs [317 kg].
Is the Cub Cadet 1710 4WD?
The Cub Cadet 1710 is available in 2WD.