Introduction
Cub Cadet 1730 Lawn Tractor
The Cub Cadet 1730 is a lawn tractor manufactured by MTD, produced between 1992 and 1993. It is designed for residential lawn maintenance and is compatible with 38, 44, and 46-inch mower decks.
Engine and Performance
The tractor is powered by a 691 cc air-cooled, vertical-shaft, opposed-twin engine. It produces a gross power output of 17 hp (12.7 kW). The engine features a bore/stroke ratio of 3.125 by 2.75 inches and a compression ratio of 6.0:1. The oil capacity is 2 quarts (1.9 liters), with a recommended oil change interval of 50 hours.
Transmission and Drivetrain
The machine utilizes a belt-driven hydrostatic transmission providing infinite forward and reverse gears, allowing for variable speed control without manual shifting. It features a two-wheel drive system and is equipped with dry disc brakes for deceleration and parking.
Power Take-Off and Hydraulics
The 1730 is equipped with an independent mid-mounted Power Take-Off (PTO) system. Engagement of the mower deck or other implements is managed via an electric clutch, which facilitates operation and reduces wear during engagement.
Electrical System
The electrical system operates on 12 volts, powered by a battery with a 235 cold cranking amp (CCA) rating. Charging is handled by an alternator system capable of 15 charging amps. The engine start is facilitated by a 12-volt electric starter.
Dimensions and Chassis
The tractor features an open operator station with manual steering. It has a wheelbase of 45 inches (114 cm), a total length of 68.5 inches (173 cm), and a height of 40 inches (101 cm) to the steering wheel. The unit weighs approximately 562 lbs (254 kg) when equipped with a 46-inch mower deck. It rolls on 15x6-6 front and 20x10-8 rear lawn/turf tires.
Conclusion
The Cub Cadet 1730 is a compact, hydrostatic-drive lawn tractor suitable for varied property maintenance tasks. Its combination of an independent mid-PTO and a range of compatible mower decks makes it a versatile tool for residential mowing operations.
Production Information of Cub Cadet, 1730
- Lawn tractor
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, 1730
| Wheelbase | 45 inches [114 cm] |
|---|---|
| Weight | 562 lbs [254 kg] |
| Length | 68.5 inches [173 cm] |
| Height (steering wheel) | 40 inches [101 cm] |
Weight with 46-inch mower deck.
| Lawn/turf front | 15x6-6 |
|---|---|
| Lawn/turf rear | 20x10-8 |
Engine Specifications of Cub Cadet, 1730
- Air-cooled vertical-shaft opposed-twin
| Starter volts | 12 |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Oil capacity | 2 qts [1.9 L] |
| Compression | 6.0:1 |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Oil change | 50 h |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Sparkplug | 759-334 |
| Starter | Electric |
| Idle RPM | 1350-3400 |
| Power (gross) | 17 hp [12.7 kW] |
Transmission Information of Cub Cadet, 1730
Transmission variants 1
| Type | Belt-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, 1730
- Two-wheel drive
- Open operator station.
- Manual steering
- Dry disc brakes
Power Information of Cub Cadet, 1730
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of Cub Cadet, 1730
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 235 |
| Charging system | Alternator |
| Charging amps | 15 |
Where it sits
Its power puts it in the 66th percentile of 1990s models in our database (1093 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1730 have?
The Cub Cadet 1730 delivers 17 HP.
What years was the Cub Cadet 1730 produced?
The Cub Cadet 1730 was produced in 1992-1993.
What transmission does the Cub Cadet 1730 use?
The Cub Cadet 1730 uses a Belt-driven hydrostatic transmission.
How much does the Cub Cadet 1730 weigh?
The Cub Cadet 1730 weighs 562 lbs*Weight with 46-inch mower deck. [254 kg].
Is the Cub Cadet 1730 4WD?
The Cub Cadet 1730 is available in 2WD.