Cub Cadet 2140 lawn tractor

Cub Cadet 2140

Power

14 hp

Production

1994-1995

Transmission

Auto Gear System

Drive

2WD

From the same series:

2135
2145

Introduction

Cub Cadet 2140 Lawn Tractor

The Cub Cadet 2140 is a lawn tractor manufactured by Cub Cadet, a division of MTD, between 1994 and 1995. Designed for residential property maintenance, this two-wheel drive model features an open operator station and is equipped with a 42-inch mower deck.

Engine and Powertrain

The tractor is powered by an air-cooled, horizontal-shaft engine with a 388 cc displacement, producing a gross power output of 14 hp (10.4 kW) at a rated speed of 3600 RPM. The engine cooling system relies on airflow, and the lubrication system has a capacity of 1 quart (0.9 L), with a recommended oil change interval of 100 hours. The electrical system is grounded to the negative terminal and utilizes a 12-volt starter.

Transmission and Operation

The 2140 utilizes a shaft-driven Auto Gear System consisting of a six-speed transmission for both forward and reverse operation. It features an electric clutch and an independent front power take-off (PTO). The transmission housing has an oil capacity of 6 quarts (5.7 L). Operators should note that the transmission pedals are designed for gear selection and clutch engagement rather than speed control to prevent premature component wear.

Dimensions and Chassis

Built on a 47-inch (119 cm) wheelbase, the tractor has an overall length of 72 inches (182 cm) and a width of 51 inches (129 cm). It provides a ground clearance of 6 inches (15 cm). The steering is manual, and the machine is fitted with lawn/turf tires, measuring 15x6-6 at the front and 20x9-8 at the rear, suitable for standard mowing applications.

Conclusion

The Cub Cadet 2140 is a dedicated lawn tractor suited for residential landscaping tasks requiring a standard 42-inch cutting width. Its mechanical design emphasizes simplicity and ease of maintenance, making it a functional option for routine groundskeeping duties.

Production Information of Cub Cadet, 2140

  • Lawn tractor
ManufacturerCub Cadet (a part of MTD)

Dimension and Tires Information of Cub Cadet, 2140

Rear tread27.5 inches [69 cm]
Wheelbase47 inches [119 cm]
Ground clearance6 inches [15 cm]
Height (steering wheel)42 inches [106 cm]
Length72 inches [182 cm]
Front tread30 inches [76 cm]
Width51 inches [129 cm]
Lawn/turf front15x6-6
Lawn/turf rear20x9-8

Engine Specifications of Cub Cadet, 2140

  • Air-cooled horizontal-shaft
Sparkplug gap0.035 inches [0.889 mm]
Displacement388 cc [23.7 ci]
Oil capacity1 qts [0.9 L]
Rated RPM3600
Bore/Stroke3.31x2.76 inches [84 x 70 mm]
Oil change100 h
Starter volts12
StarterElectric
Power (gross)14 hp [10.4 kW]

Transmission Information of Cub Cadet, 2140

Transmission variants 1

  • The Cub Cadet Auto Gear uses a six-speed transmission with forward and reverse foot pedals. The pedals control a clutch and should be fully depressed for whichever gear is selected. Using the pedals as a speed control will result in premature clutch failure.
TransmissionAuto Gear System
Oil capacity6 qts [5.7 L]
TypeShaft-driven gear
Gears6 forward and reverse

Transmission variants 2

Mechanical Specs of Cub Cadet, 2140

  • Two-wheel drive
  • Manual steering
  • Open operator station.

Power Information of Cub Cadet, 2140

Front PTOIndependent
ClutchElectric

Electrical System of Cub Cadet, 2140

GroundNegative
Charging amps15
Battery volts12

Where it sits

With 14 HP, the Cub Cadet 2140 sits just above 2135 (12 HP) in Cub Cadet's range. Its power puts it in the 44th percentile of 1990s models in our database (1093 machines).

Frequently asked questions

How much horsepower does the Cub Cadet 2140 have?

The Cub Cadet 2140 delivers 14 HP.

What years was the Cub Cadet 2140 produced?

The Cub Cadet 2140 was produced in 1994-1995.

What transmission does the Cub Cadet 2140 use?

The Cub Cadet 2140 uses a Auto Gear System transmission.

Is the Cub Cadet 2140 4WD?

The Cub Cadet 2140 is available in 2WD.

Compare the Cub Cadet 2140 with another model