Cub Cadet 1450
Power
14 hp
Production
1974-1980
Transmission
Shaft-driven hydrostatic
Weight
690 lbs [312 kg]
Drive
2WD
From the same series:
Introduction
Cub Cadet 1450 Garden Tractor
The Cub Cadet 1450 is a garden tractor manufactured by Cub Cadet, a division of International Harvester, in Louisville, Kentucky, between 1974 and 1980. This model was designed for residential property maintenance and versatile landscaping tasks.
Engine and Performance
The tractor is powered by a 14 hp (10.4 kW) air-cooled Kohler engine with a displacement of 512 cc (31.27 ci). It features a side-draft carburetor and a dry-type air cleaner. The engine operates at a rated speed of 3400 RPM, with an idle range between 1800 and 3600 RPM. Routine maintenance requires an oil capacity of 1.5 quarts (1.4 L), with recommended changes every 30 hours of operation.
Transmission and Drivetrain
The 1450 utilizes a shaft-driven hydrostatic transmission, allowing for infinite forward and reverse speeds without the need for traditional gear shifting. This provides smooth operation during mowing or implement work. The system requires 7 quarts (6.6 L) of oil for proper lubrication.
PTO and Hydraulics
Equipped with an independent front Power Take-Off (PTO) operating at 3400 RPM, the tractor utilizes an electric clutch for engagement. This configuration allows for the operation of various front-mounted implements, including mower decks available in 38, 44, and 50-inch sizes.
Mechanical and Dimensions
The tractor features a two-wheel drive configuration with manual steering. Braking is handled by dry disc brakes, though wet disc brakes were introduced for models produced after 1977. The machine has a wheelbase of 44 inches (111 cm), a total length of 69 inches (175 cm), and a shipping weight of 690 lbs (312 kg). It is equipped with a sleeve hitch for connecting rear-mounted implements.
Electrical System
The electrical architecture is based on a 12-volt battery system with a negative ground. Charging is managed by a flywheel alternator providing 15 charging amps, ensuring the battery remains maintained during regular use.
Conclusion
The Cub Cadet 1450 is a durable, utility-focused garden tractor. Its hydrostatic transmission and independent PTO make it well-suited for homeowners requiring a reliable machine for mowing, light towing, and property care throughout the mid-to-late 1970s production era.
Production Information of Cub Cadet, 1450
- Garden tractor
- Built in Louisville, Kentucky, USA
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 1450
| Front tread | 28 inches [71 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Shipping weight | 690 lbs [312 kg] |
| Height (steering wheel) | 41 inches [104 cm] |
| Length | 69 inches [175 cm] |
| Rear tread | 27 inches [68 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 37 inches [93 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x8.50-12 |
Engine Specifications of Cub Cadet, 1450
- Air-cooled
| Intake valve clearance | 0.010 inches [0.254 mm] |
|---|---|
| Point gap | 0.020 inches [0.508 mm] |
| Fuel system | Kohler side-draft carburetor |
| Exhaust valve clearance | 0.020 inches [0.508 mm] |
| Rated RPM | 3400 |
| Idle RPM | 1800-3600 |
| Air cleaner | Dry |
| Displacement | 512 cc [31.27 ci] |
| Power (gross) | 14 hp [10.4 kW] |
| Oil capacity | 1.5 qts [1.4 L] |
| Oil change | 30 h |
| Bore/Stroke | 3.50x3.25 inches [89 x 83 mm] |
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
Cold
Cold
Transmission Information of Cub Cadet, 1450
Transmission variants 1
| Type | Shaft-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
| Oil capacity | 7 qts [6.6 L] |
Transmission variants 2
| 3 | Forward/reverse |
|---|---|
| 1 | Brake |
| 2 | Throttle |
Mechanical Specs of Cub Cadet, 1450
- Two-wheel drive
- Open operator station.
- Manual steering
| Brakes | Dry disc |
|---|
Wet disc brakes available after 1977.
Power Information of Cub Cadet, 1450
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | 3400 |
Three-Point Hitch of Cub Cadet, 1450
| Type(optional) | Sleeve hitch |
|---|
Electrical System of Cub Cadet, 1450
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 14 HP, the Cub Cadet 1450 sits between 1250 (12 HP) and 1650 (16 HP) in Cub Cadet's range. Its power puts it in the 83th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1450 have?
The Cub Cadet 1450 delivers 14 HP.
What years was the Cub Cadet 1450 produced?
The Cub Cadet 1450 was produced in 1974-1980.
What transmission does the Cub Cadet 1450 use?
The Cub Cadet 1450 uses a Shaft-driven hydrostatic transmission.
How much does the Cub Cadet 1450 weigh?
The Cub Cadet 1450 weighs 690 lbs [312 kg].
Is the Cub Cadet 1450 4WD?
The Cub Cadet 1450 is available in 2WD.