Introduction
Cub Cadet 1650 Garden Tractor
The Cub Cadet 1650 is a garden tractor produced between 1974 and 1980 in Louisville, Kentucky, by Cub Cadet, then a division of International Harvester. It is designed for residential and light commercial property maintenance.
Engine and Performance
The tractor is powered by a 16 hp (11.9 kW) air-cooled engine with a displacement of 588 cc (35.89 ci). It utilizes a Kohler side-draft carburetor and a dry air cleaner system. The engine operates at a rated 3400 RPM. Maintenance requirements include an oil capacity of 1.5 quarts (1.4 L) with a recommended oil change interval of 30 hours.
Transmission and Drivetrain
The 1650 features a shaft-driven hydrostatic transmission, which allows for infinite forward and reverse speed control without the need for traditional gear shifting. It is configured with two-wheel drive and manual steering. Braking is provided by dry disc brakes, with wet disc brakes introduced on models produced after 1977.
Power Take-Off and Attachments
The machine is equipped with an independent front PTO (Power Take-Off) operated by an electric clutch. The front PTO runs at a rated speed of 3400 RPM. The tractor supports various mower decks, including 38-inch, 44-inch, and 50-inch configurations, and features an optional sleeve hitch for additional ground-engaging implements.
Dimensions and Electrical
The tractor has a wheelbase of 44 inches (111 cm) and an overall length of 69 inches (175 cm). It offers a ground clearance of 6 inches (15 cm). The electrical system is a 12-volt setup, utilizing a flywheel alternator for charging with a 15-amp output.
Conclusion
The Cub Cadet 1650 is a robust garden tractor suitable for lawn mowing and small-scale property maintenance. Its hydrostatic transmission and independent PTO system provide the necessary control and versatility for a range of garden attachments.
Production Information of Cub Cadet, 1650
- Garden tractor
- Built in Louisville, Kentucky, USA
| Manufacturer | Cub Cadet (a part of International Harvester) |
|---|
Dimension and Tires Information of Cub Cadet, 1650
| Front tread | 28 inches [71 cm] |
|---|---|
| Wheelbase | 44 inches [111 cm] |
| Shipping weight | 690 lbs [312 kg] |
| Height (steering wheel) | 41 inches [104 cm] |
| Length | 69 inches [175 cm] |
| Rear tread | 27 inches [68 cm] |
| Ground clearance | 6 inches [15 cm] |
| Width | 39 inches [99 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Cub Cadet, 1650
- Air-cooled
| Intake valve clearance | 0.010 inches [0.254 mm] |
|---|---|
| Point gap | 0.020 inches [0.508 mm] |
| Fuel system | Kohler side-draft carburetor |
| Exhaust valve clearance | 0.020 inches [0.508 mm] |
| Rated RPM | 3400 |
| Idle RPM | 1800-3600 |
| Air cleaner | Dry |
| Displacement | 588 cc [35.89 ci] |
| Power (gross) | 16 hp [11.9 kW] |
| Oil capacity | 1.5 qts [1.4 L] |
| Oil change | 30 h |
| Bore/Stroke | 3.75x3.25 inches [95 x 83 mm] |
| Sparkplug gap | 0.035 inches [0.889 mm] |
| Sparkplug | Champion H-10 |
| Starter volts | 12 |
Cold
Cold
Transmission Information of Cub Cadet, 1650
Transmission variants 1
| Type | Shaft-driven hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
| Oil capacity | 7 qts [6.6 L] |
Mechanical Specs of Cub Cadet, 1650
- Two-wheel drive
- Open operator station.
- Manual steering
| Brakes | Dry disc |
|---|
Wet disc brakes after 1977.
Power Information of Cub Cadet, 1650
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | 3400 |
Three-Point Hitch of Cub Cadet, 1650
| Type | Sleeve hitch (optional) |
|---|
Electrical System of Cub Cadet, 1650
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 16 HP, the Cub Cadet 1650 sits between 1450 (14 HP) and 782 (17 HP) in Cub Cadet's range. Its power puts it in the 95th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Cub Cadet 1650 have?
The Cub Cadet 1650 delivers 16 HP.
What years was the Cub Cadet 1650 produced?
The Cub Cadet 1650 was produced in 1974-1980.
What transmission does the Cub Cadet 1650 use?
The Cub Cadet 1650 uses a Shaft-driven hydrostatic transmission.
How much does the Cub Cadet 1650 weigh?
The Cub Cadet 1650 weighs 690 lbs [312 kg].
Is the Cub Cadet 1650 4WD?
The Cub Cadet 1650 is available in 2WD.