Cub Cadet 582 lawn tractor

Cub Cadet 582

Power

16 hp

Production

1979-1985

Engine

Gasoline, 2-cylinder

Transmission

Gear

Weight

640 lbs [290 kg]

Drive

2WD

From the same series:

482
682

Introduction

Cub Cadet 582 Garden Tractor

The Cub Cadet 582 is a garden tractor manufactured by International Harvester in Louisville, Kentucky, between 1979 and 1985. Designed for residential landscaping and maintenance, this machine belongs to the Cub Cadet series of tractors produced during that era.

Engine and Powertrain

The tractor is powered by a 655 cc, two-cylinder Briggs & Stratton 401417 gasoline engine. This air-cooled unit delivers a gross power output of 16 hp (11.9 kW) at a rated speed of 3600 RPM, with a peak torque of 25.8 lb-ft (35.0 Nm) at 2600 RPM. The fuel system utilizes a downdraft carburetor integrated with a fuel pump, and the air intake is protected by a dry-type air cleaner with a pre-cleaner.

Transmission and Chassis

Power is transferred through a gear-type transmission featuring three forward gears and one reverse gear. The drivetrain includes a 4.5-inch dry disc clutch. The tractor operates on a two-wheel drive configuration, utilizing manual steering for operator control and wet disc brakes for deceleration. The operator station is of an open design.

Dimensions and Equipment

The 582 model features a 44-inch wheelbase and a ground clearance of 6 inches. It measures 72 inches in length and 37.75 inches in width, with a shipping weight of approximately 640 lbs. The tractor is equipped with lawn and turf tires, sized 16x6.50-8 for the front and 23x10.50-12 for the rear. It supports mower deck attachments in 38, 44, and 50-inch configurations.

Conclusion

The Cub Cadet 582 is a mechanical garden tractor suitable for standard lawn care and light grounds maintenance tasks, offering a robust engine and a simple, reliable gear-based transmission system.

Production Information of Cub Cadet, 582

  • Garden tractor
  • Built in Louisville, Kentucky, USA
ManufacturerCub Cadet (a part of International Harvester)

Dimension and Tires Information of Cub Cadet, 582

Front tread29 inches [73 cm]
Wheelbase44 inches [111 cm]
Shipping weight640 lbs [290 kg]
Height (steering wheel)43 inches [109 cm]
Length72 inches [182 cm]
Rear tread27 inches [68 cm]
Ground clearance6 inches [15 cm]
Width37.75 inches [95 cm]
Lawn/turf front16x6.50-8
Lawn/turf rear23x10.50-12

Engine Specifications of Cub Cadet, 582

  • Briggs & Stratton 401417
  • Air-cooled
  • Gasoline
  • 2-cylinder
SparkplugRJ-12
Fuel systemDowndraft carburetor with integral fuel pump
Air cleanerDry with pre-cleaner
Torque25.8 lb-ft [35.0 Nm]
Rated RPM3600
Displacement655 cc [40 ci]
Power (gross)16 hp [11.9 kW]
Bore/Stroke3.4375x2.156 inches [87 x 55 mm]
Oil capacity1.75 qts [1.7 L]
Starter volts12
Torque RPM2600

Transmission Information of Cub Cadet, 582

Transmission variants 1

TypeGear
Oil capacity3.5 qts [3.3 L]
Gears3 forward and 1 reverse
Clutch4.5-inch dry disc

Mechanical Specs of Cub Cadet, 582

  • Two-wheel drive
  • Open operator station.
  • Wet disc brakes
SteeringManual

Electrical System of Cub Cadet, 582

GroundNegative
Battery AH32
Battery volts12
Charging systemAlternator
Charging amps13

Where it sits

With 16 HP, the Cub Cadet 582 sits between 1200 (12 HP) and 682 (17 HP) in Cub Cadet's range. Its power puts it in the 95th percentile of 1970s models in our database (1008 machines).

Frequently asked questions

How much horsepower does the Cub Cadet 582 have?

The Cub Cadet 582 delivers 16 HP.

What years was the Cub Cadet 582 produced?

The Cub Cadet 582 was produced in 1979-1985.

What engine does the Cub Cadet 582 have?

The Cub Cadet 582 is powered by a Gasoline, 2-cylinder engine.

What transmission does the Cub Cadet 582 use?

The Cub Cadet 582 uses a Gear transmission.

How much does the Cub Cadet 582 weigh?

The Cub Cadet 582 weighs 640 lbs [290 kg].

Is the Cub Cadet 582 4WD?

The Cub Cadet 582 is available in 2WD.

Compare the Cub Cadet 582 with another model