Cub Cadet 2518 lawn tractor

Cub Cadet 2518

Power

20 hp

Production

2002-2003

Transmission

Shaft-driven hydrostatic

Weight

522 lbs [236 kg]

Drive

2WD

From the same series:

2206

Introduction

Cub Cadet 2518 Garden Tractor

The Cub Cadet 2518 is a garden tractor produced by MTD between 2002 and 2003. Belonging to the 2206 series, this machine is engineered for residential lawn maintenance and versatile property management tasks.

Engine and Performance

The tractor is powered by an air-cooled, horizontal-shaft V-twin engine with a displacement of 624 cc. It delivers a gross power output of 20 hp (14.9 kW) and 32.2 lb-ft (43.7 Nm) of torque at 2200 RPM. The engine is designed for a rated speed of 3350 RPM and features an electric starter system.

Transmission and Drive System

The 2518 utilizes a shaft-driven hydrostatic transmission, providing the operator with infinite forward and reverse speed control without the need for manual gear shifting. It is a two-wheel-drive platform equipped with internal expanding brakes for reliable stopping power.

Power Take-Off and Hydraulics

To support various implements, the tractor is equipped with an independent front power take-off (PTO) engaged via an electric clutch. This configuration allows for the efficient operation of a 44-inch or 48-inch mower deck.

Dimensions and Chassis

The machine features an open operator station and manual steering. With a wheelbase of 47 inches and an overall width of 49 inches, it maintains a compact footprint. The unit weighs 522 lbs and rides on turf-specific tires, measuring 16x6.5-8 in the front and 23x9.5-12 in the rear.

Conclusion

The Cub Cadet 2518 is a dedicated garden tractor suited for landowners requiring a maneuverable machine for mowing and light utility work. Its hydrostatic drive and independent PTO system provide a balance of operational ease and functional versatility for standard property maintenance.

Production Information of Cub Cadet, 2518

  • Garden tractor
ManufacturerCub Cadet (a part of MTD)

Dimension and Tires Information of Cub Cadet, 2518

4-bolt flange rear axle1 inch diameter [25 mm]
Wheelbase47 inches [119 cm]
Weight522 lbs [236 kg]
Height (steering wheel)43 inches [109 cm]
Length72 inches [182 cm]
Front tread31.5 inches [80 cm]
Ground clearance6 inches [15 cm]
Width49 inches [124 cm]
Rear tread30.25 inches [76 cm]
Lawn/turf front16x6.5-8
Lawn/turf rear23x9.5-12

Engine Specifications of Cub Cadet, 2518

  • Air-cooled horizontal-shaft V-twin
Rated RPM3350
Oil change100 h
Torque RPM2200
Oil capacity2 qts [1.9 L]
Displacement624 cc [38.1 ci]
Bore/Stroke3.03x2.64 inches [77 x 67 mm]
Power (gross)20 hp [14.9 kW]
Torque32.2 lb-ft [43.7 Nm]
Idle RPM1400-3600
Sparkplug gap0.030 inches [0.762 mm]
Starter volts12
StarterElectric

Transmission Information of Cub Cadet, 2518

Transmission variants 1

TypeShaft-driven hydrostatic
Type(optional)Cub Cadet Drive System Fluid Plus
Oil typeCub Cadet Drive System Fluid Plus
GearsInfinite forward and reverse
Oil change100 h
Oil capacity6 qts [5.7 L]

Mechanical Specs of Cub Cadet, 2518

  • Two-wheel drive
  • Open operator station.
  • Manual steering
  • Internal expanding brakes

Power Information of Cub Cadet, 2518

Front PTOIndependent
ClutchElectric

Three-Point Hitch of Cub Cadet, 2518

Type(optional)Sleeve hitch

Electrical System of Cub Cadet, 2518

GroundNegative
Battery volts12
Charging systemAlternator
Charging amps15

Where it sits

Its power puts it in the 56th percentile of 2000s models in our database (1174 machines).

Frequently asked questions

How much horsepower does the Cub Cadet 2518 have?

The Cub Cadet 2518 delivers 20 HP.

What years was the Cub Cadet 2518 produced?

The Cub Cadet 2518 was produced in 2002-2003.

What transmission does the Cub Cadet 2518 use?

The Cub Cadet 2518 uses a Shaft-driven hydrostatic transmission.

How much does the Cub Cadet 2518 weigh?

The Cub Cadet 2518 weighs 522 lbs [236 kg].

Is the Cub Cadet 2518 4WD?

The Cub Cadet 2518 is available in 2WD.

Compare the Cub Cadet 2518 with another model