Introduction
Cub Cadet GT 2042 Garden Tractor
The Cub Cadet GT 2042 is a garden tractor produced in 2014, designed for residential lawn maintenance and property management. It is part of the GT 2050 series, featuring a two-wheel drive configuration and an open operator's station.
Engine Specifications
The tractor is powered by a Kohler CH640 engine, an air-cooled, two-cylinder gasoline unit with a horizontal shaft. It features a displacement of 673 cc (41.1 ci) and a bore/stroke ratio of 3.2x2.6 inches. This engine provides a gross power output of 20.5 hp (15.3 kW) and utilizes an electric starter system.
Transmission and Drive
The GT 2042 utilizes a Hydro-Gear BDU-10 shaft-driven hydrostatic transmission. This system provides infinite forward and reverse gear selection, allowing for smooth speed control without manual shifting. The machine operates on a two-wheel drive system.
Electrical and PTO
The electrical system operates on 12 volts, supported by a battery with 275 CCA and a flywheel alternator providing 15 charging amps. The tractor is equipped with an independent front power take-off (PTO) engaged via an electric clutch for attachment operation.
Dimensions and Chassis
The tractor has a wheelbase of 50.6 inches and a total length of 76 inches. The chassis is supported by a 0.75-inch diameter cast-iron front axle and a 1.0-inch diameter rear axle. It is fitted with lawn/turf tires, measuring 16x6.5 at the front and 23x10.5 at the rear.
Conclusion
The Cub Cadet GT 2042 is a standard garden tractor configuration for 2014, suitable for residential mowing and light ground-engaging tasks. Its hydrostatic transmission and independent electric PTO offer ease of operation for maintenance tasks on standard property sizes.
Production Information of Cub Cadet, GT 2042
- Garden tractor
- Original price was $4,700 in 2014
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, GT 2042
| Wheelbase | 50.6 inches [128 cm] |
|---|---|
| Rear axle | 1.0 inch diameter [25 mm] |
| Length | 76 inches [193 cm] |
| Front axle | Cast-iron: 0.75 inch diameter [19 mm] |
| Lawn/turf front | 16x6.5 |
|---|---|
| Lawn/turf rear | 23x10.5 |
Engine Specifications of Cub Cadet, GT 2042
- Kohler CH640
- Air-cooled horizontal-shaft V-Twin
- Gasoline
- 2-cylinder
| Power (gross) | 20.5 hp [15.3 kW] |
|---|---|
| Displacement | 673 cc [41.1 ci] |
| Starter | Electric |
| Bore/Stroke | 3.2x2.6 inches [81 x 66 mm] |
| Oil capacity | 2.0 qts [1.9 L] |
| Starter volts | 12 |
Transmission Information of Cub Cadet, GT 2042
Transmission variants 1
| Transmission | Hydro-Gear BDU-10 |
|---|---|
| Oil capacity | 5.7 qts [5.4 L] |
| Type | Shaft-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, GT 2042
- Two-wheel drive
- Open operator's station.
- Disc brakes
| Steering | Manual |
|---|
Power Information of Cub Cadet, GT 2042
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of Cub Cadet, GT 2042
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 275 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 20 HP, the Cub Cadet GT 2042 sits just below GT 2050 (22 HP) in Cub Cadet's range. Its power puts it in the 28th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Cub Cadet GT 2042 have?
The Cub Cadet GT 2042 delivers 20 HP.
What years was the Cub Cadet GT 2042 produced?
The Cub Cadet GT 2042 was produced in 2014.
What engine does the Cub Cadet GT 2042 have?
The Cub Cadet GT 2042 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Cub Cadet GT 2042 use?
The Cub Cadet GT 2042 uses a Hydro-Gear BDU-10 transmission.
Is the Cub Cadet GT 2042 4WD?
The Cub Cadet GT 2042 is available in 2WD.