Introduction
Cub Cadet XT1 LT46 EFI Lawn Tractor
The Cub Cadet XT1 LT46 EFI is a lawn tractor introduced in 2016, designed for residential maintenance and lawn care applications. Manufactured by Cub Cadet, a division of MTD, this machine is engineered for efficiency and ease of operation in varied gardening environments.
Engine and Performance
The tractor is powered by a Zongshen 9X90HU gasoline engine. This single-cylinder, air-cooled unit features a displacement of 547 cc and incorporates electronic fuel injection (EFI) to optimize combustion and performance. It produces 15.4 hp (11.5 kW) and utilizes a 12-volt electric starter system.
Transmission and Drive
The unit is equipped with a Tuff Torq K46 hydrostatic transmission, which is belt-driven. This system provides infinite forward and reverse gears, allowing for smooth speed control without the need for traditional gear shifting. The machine operates with a two-wheel drive configuration.
Mowing Deck and Dimensions
The XT1 LT46 EFI features a 46-inch mower deck suitable for medium to large areas. The vehicle measures 172 cm in length and 107 cm in height to the steering wheel, with a total weight of 195 kg. It is fitted with 15x6-6 front tires and 20x8-8 rear tires, specifically designed for lawn and turf applications.
Operator Station and Electrical
The operator interface consists of a manual steering system and an open operator station. The electrical system is grounded to the negative terminal and utilizes a battery with 230 CCA (Cold Cranking Amps) at 12 volts.
Conclusion
The Cub Cadet XT1 LT46 EFI is a focused lawn tractor intended for homeowners who require a reliable, maneuverable machine for regular grass maintenance. Its combination of an EFI engine and hydrostatic transmission provides a balance of operational efficiency and ease of use.
Production Information of Cub Cadet, XT1 LT46 EFI
- Lawn tractor
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, XT1 LT46 EFI
| Length | 68 inches [172 cm] |
|---|---|
| Height (steering wheel) | 42.5 inches [107 cm] |
| Weight | 430 lbs [195 kg] |
| Lawn/turf front | 15x6-6 |
|---|---|
| Lawn/turf rear | 20x8-8 |
Engine Specifications of Cub Cadet, XT1 LT46 EFI
- Zongshen 9X90HU
- Air-cooled vertical-shaft
- Gasoline
- 1-cylinder
| Fuel system | Electronic fuel injection |
|---|---|
| Displacement | 547 cc [33.4 ci] |
| Starter | Electric |
| Power | 15.4 hp [11.5 kW] |
| Oil capacity | 1.8 qts [1.7 L] |
| Starter volts | 12 |
Transmission Information of Cub Cadet, XT1 LT46 EFI
Transmission variants 1
| Transmission | Tuff Torq K46 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, XT1 LT46 EFI
- Two-wheel drive
- Manual steering
- Open operator station.
Electrical System of Cub Cadet, XT1 LT46 EFI
| Ground | Negative |
|---|---|
| Battery CCA | 230 |
| Battery volts | 12 |
Where it sits
With 15 HP, the Cub Cadet XT1 LT46 EFI sits just below XT1 LT46 (22 HP) in Cub Cadet's range. Its power puts it in the 8th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Cub Cadet XT1 LT46 EFI have?
The Cub Cadet XT1 LT46 EFI delivers 15 HP.
What years was the Cub Cadet XT1 LT46 EFI produced?
The Cub Cadet XT1 LT46 EFI was produced in 2016+.
What engine does the Cub Cadet XT1 LT46 EFI have?
The Cub Cadet XT1 LT46 EFI is powered by a Gasoline, 1-cylinder engine.
What transmission does the Cub Cadet XT1 LT46 EFI use?
The Cub Cadet XT1 LT46 EFI uses a Tuff Torq K46 transmission.
How much does the Cub Cadet XT1 LT46 EFI weigh?
The Cub Cadet XT1 LT46 EFI weighs 430 lbs [195 kg].
Is the Cub Cadet XT1 LT46 EFI 4WD?
The Cub Cadet XT1 LT46 EFI is available in 2WD.