Introduction
Cub Cadet Z-Force S48 Zero-Turn Mower
The Cub Cadet Z-Force S48 is a zero-turn riding mower produced between 2010 and 2013, designed for residential and light-commercial lawn maintenance. This model is part of the broader Z-Force series and is engineered for high maneuverability and efficient grass cutting on expansive lawns.
Engine and Power
The machine is powered by a Kawasaki FR651V gasoline engine. This is an air-cooled, vertical-shaft V-Twin unit with two cylinders and a displacement of 726 cc (44.3 ci). It delivers a gross power output of 22 horsepower (16.4 kW). The engine utilizes an electric starter system powered by a 12-volt battery with 275 CCA.
Transmission and Steering
The Z-Force S48 features a hydrostatic transmission, specifically the Hydro-Gear EZT model. This system provides infinite forward and reverse speed control, allowing for precise adjustments during operation. The mower utilizes differential steering and is configured as a two-wheel drive machine to facilitate the zero-turn capabilities required for tight maneuvering around obstacles.
Mowing Deck and Dimensions
The mower is equipped with a 48-inch cutting deck. It features an independent mid-mounted PTO (Power Take-Off) with an electric clutch for efficient engagement of the cutting blades. With a total wheelbase of 109 cm and an overall length of 177 cm, the machine weighs approximately 328 kg (725 lbs). It rides on 13x5.0-6 front tires and 18x9.5-8 rear tires, optimized for turf surfaces.
Conclusion
The Cub Cadet Z-Force S48 is a robust zero-turn mower suited for operators requiring efficient grass management on large properties. Its combination of a reliable Kawasaki V-Twin engine, hydrostatic drive, and dedicated turf tires provides a balance of performance and control for standard lawn care applications.
Production Information of Cub Cadet, Z-Force S48
- Zero-turn mower
| Manufacturer | Cub Cadet (a part of MTD) |
|---|
Dimension and Tires Information of Cub Cadet, Z-Force S48
| Wheelbase | 43 inches [109 cm] |
|---|---|
| Length | 70 inches [177 cm] |
| Weight | 725 lbs [328 kg] |
| Lawn/turf front | 13x5.0-6 |
|---|---|
| Lawn/turf rear | 18x9.5-8 |
Engine Specifications of Cub Cadet, Z-Force S48
- Kawasaki FR651V
- Air-cooled vertical-shaft V-Twin
- Gasoline
- 2-cylinder
| Power (gross) | 22 hp [16.4 kW] |
|---|---|
| Displacement | 726 cc [44.3 ci] |
| Starter | Electric |
| Bore/Stroke | 3.071x2.992 inches [78 x 76 mm] |
| Oil capacity | 2 qts [1.9 L] |
| Starter volts | 12 |
Transmission Information of Cub Cadet, Z-Force S48
Transmission variants 1
| Transmission | Hydro-Gear EZT |
|---|---|
| Oil change | Sealed unit, owner service is not recommended |
| Type | Hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Cub Cadet, Z-Force S48
- Two-wheel drive
- Open operator station.
| Steering | Differential |
|---|
Power Information of Cub Cadet, Z-Force S48
| Mid PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of Cub Cadet, Z-Force S48
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 275 |
| Charging system | Flywheel alternator |
| Charging amps | 15 |
Where it sits
With 22 HP, the Cub Cadet Z-Force S48 sits just above Z-Force S46 (20 HP) in Cub Cadet's range. Its power puts it in the 45th percentile of 2010s models in our database (783 machines).
Frequently asked questions
How much horsepower does the Cub Cadet Z-Force S48 have?
The Cub Cadet Z-Force S48 delivers 22 HP.
What years was the Cub Cadet Z-Force S48 produced?
The Cub Cadet Z-Force S48 was produced in 2010-2013.
What engine does the Cub Cadet Z-Force S48 have?
The Cub Cadet Z-Force S48 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Cub Cadet Z-Force S48 use?
The Cub Cadet Z-Force S48 uses a Hydro-Gear EZT transmission.
How much does the Cub Cadet Z-Force S48 weigh?
The Cub Cadet Z-Force S48 weighs 725 lbs [328 kg].
Is the Cub Cadet Z-Force S48 4WD?
The Cub Cadet Z-Force S48 is available in 2WD.