Introduction
Production Information of Ingersoll lawn tractors, 4116
The production information of the tractor (4116) includes details about its manufacturing.
| Garden tractor |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 4116
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 11 inches [27 cm] |
|---|---|
| Wheelbase | 48 inches [121 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 72 inches [182 cm] |
| Front tread | 33.5 inches [85 cm] |
| Weight | 725 lbs [328 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 8.00-16 |
Engine Specifications of Ingersoll lawn tractors, 4116
Get the specifications for the engine and if different options are available.
| Onan P216G |
| Air-cooled horizontal-shaft opposed twin |
| Gasoline |
| 2-cylinder |
| Oil capacity | 1.8 qts [1.7 L] |
|---|---|
| Displacement | 709 cc [43.3 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Power (gross) | 16 hp [11.9 kW] |
Transmission Information of Ingersoll lawn tractors, 4116Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 4116Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Power steering |
| Mechanical band brakes |
Power Information of Ingersoll lawn tractors, 4116Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of Ingersoll lawn tractors, 4116
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 2.25 gpm [8.5 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 9.5 gpm [36.0 lpm] |
| Rear valves | 2 |
| Capacity | 1.5 gal [5.7 L] |
| Steering press. | 720 psi [49.6 bar] |
| Total flow | 13.75 gpm [52.0 lpm] |
| Pressure | 2800 psi [193.1 bar] |
Electrical System of Ingersoll lawn tractors, 4116
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 300 |
| Charging system | Flywheel alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 4116 have?
The Ingersoll lawn tractors 4116 delivers 16 HP.
What years was the Ingersoll lawn tractors 4116 produced?
The Ingersoll lawn tractors 4116 was produced in 1992.
What engine does the Ingersoll lawn tractors 4116 have?
The Ingersoll lawn tractors 4116 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 4116 use?
The Ingersoll lawn tractors 4116 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 4116 weigh?
The Ingersoll lawn tractors 4116 weighs 725 lbs [328 kg].
Is the Ingersoll lawn tractors 4116 4WD?
The Ingersoll lawn tractors 4116 is available in 2WD.