Introduction
Production Information of Ingersoll lawn tractors, 3016
The production information of the tractor (3016) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 3016
This section sums up the dimension and tires information of the tractor.
| Clearance (rear axle) | 7.2 inches [18 cm] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 35.5 inches [90 cm] |
| Height (steering wheel) | 40 inches [101 cm] |
| Length | 65 inches [165 cm] |
| Front tread | 28.75 inches [73 cm] |
| Weight | 683 lbs [309 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 27.75 inches [70 cm] |
| Lawn/turf front | 16.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Ingersoll lawn tractors, 3016
Get the specifications for the engine and if different options are available.
| Briggs & Stratton 303777 |
| Air-cooled |
| 2-cylinder |
| The Briggs & Stratton engine was used in the 3016 starting in 1993. |
| Gasoline |
| Exhaust valve clearance | 0.013 inches (cold) [0.330 mm] |
|---|---|
| Intake valve clearance | 0.005 inches (cold) [0.127 mm] |
| Power (gross) | 16 hp [11.9 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Bore/Stroke | 2.677x2.60 inches [68 x 66 mm] |
| Rated RPM | 3600 |
| Displacement | 480 cc [29.3 ci] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Sparkplug gap | 0.030 inches [0.762 mm] |
| Sparkplug | Champion RC12YC |
Transmission Information of Ingersoll lawn tractors, 3016Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 3016Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Manual steering |
| Open operator station. |
Power Information of Ingersoll lawn tractors, 3016Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | Pulley |
Hydraulics Specifications of Ingersoll lawn tractors, 3016
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 8 gpm [30.3 lpm] |
| Valves | 2 |
| Pressure | 2100 psi (transmission) [144.8 bar] |
| 575 psi (lift) [39.6 bar] |
Three-Point Hitch of Ingersoll lawn tractors, 3016
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|
Electrical System of Ingersoll lawn tractors, 3016
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 300 |
| Charging volts | 12 |
| Charging system | Flywheel alternator |
| Battery volts | 12 |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 3016 have?
The Ingersoll lawn tractors 3016 delivers 16 HP.
What years was the Ingersoll lawn tractors 3016 produced?
The Ingersoll lawn tractors 3016 was produced in 1989-2004.
What engine does the Ingersoll lawn tractors 3016 have?
The Ingersoll lawn tractors 3016 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 3016 use?
The Ingersoll lawn tractors 3016 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 3016 weigh?
The Ingersoll lawn tractors 3016 weighs 683 lbs [309 kg].
Is the Ingersoll lawn tractors 3016 4WD?
The Ingersoll lawn tractors 3016 is available in 2WD.