Introduction
Production Information of Ingersoll lawn tractors, 3018
The production information of the tractor (3018) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 3018
This section sums up the dimension and tires information of the tractor.
| 3018PS Weight | 725 lbs [328 kg] |
|---|---|
| Wheelbase | 46 inches [116 cm] |
| Height (hood) | 35.5 inches [90 cm] |
| Height (steering wheel) | 40 inches [101 cm] |
| Length | 65 inches [165 cm] |
| Clearance (rear axle) | 7.2 inches [18 cm] |
| 3018 Weight | 683 lbs [309 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 27.75 inches [70 cm] |
| Front tread | 28.75 inches [73 cm] |
| Lawn/turf front | 16.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Ingersoll lawn tractors, 3018
Get the specifications for the engine and if different options are available.
| Briggs & Stratton 350447 |
| Air-cooled |
| Gasoline |
| 2-cylinder |
| Power (gross) | 18 hp [13.4 kW] |
|---|---|
| Displacement | 569 cc [34.75 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 2.834x2.75 inches [72 x 70 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Ingersoll lawn tractors, 3018Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 3018Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| 3018 Steering | Manual |
|---|---|
| 3018PS Steering | Power |
Power Information of Ingersoll lawn tractors, 3018Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | Pulley |
Hydraulics Specifications of Ingersoll lawn tractors, 3018
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 3018 Pump flow | 8 gpm [30.3 lpm] |
| Valves | 2 |
| Pressure | 2100 psi (transmission) [144.8 bar] |
| 3018PS Pump flow | 9.5 gpm [36.0 lpm] |
| 575 psi (lift) [39.6 bar] |
Three-Point Hitch of Ingersoll lawn tractors, 3018
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|
Electrical System of Ingersoll lawn tractors, 3018
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 300 |
| Charging volts | 12 |
| Charging system | Flywheel alternator |
| Battery volts | 12 |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 3018 have?
The Ingersoll lawn tractors 3018 delivers 18 HP.
What years was the Ingersoll lawn tractors 3018 produced?
The Ingersoll lawn tractors 3018 was produced in 1989-2004.
What engine does the Ingersoll lawn tractors 3018 have?
The Ingersoll lawn tractors 3018 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 3018 use?
The Ingersoll lawn tractors 3018 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 3018 weigh?
The Ingersoll lawn tractors 3018 weighs 725 lbs [328 kg].
Is the Ingersoll lawn tractors 3018 4WD?
The Ingersoll lawn tractors 3018 is available in 2WD.