Introduction
Production Information of Ingersoll lawn tractors, 4018
The production information of the tractor (4018) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 4018
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 11 inches [27 cm] |
|---|---|
| Wheelbase | 48 inches [121 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 72 inches [182 cm] |
| Front tread | 33.5 inches [85 cm] |
| Shipping weight | 960 lbs [435 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 32x8.00-16 |
Engine Specifications of Ingersoll lawn tractors, 4018
Get the specifications for the engine and if different options are available.
| Onan P218 |
| Air-cooled horizontal-shaft horizontally-opposed |
| Gasoline |
| 2-cylinder |
| Exhaust valve clearance | 0.013 inches (cold) [0.330 mm] |
|---|---|
| Compression | 7:1 |
| Rated RPM | 3600 |
| Starter volts | 12 |
| Starter | Electric |
| Displacement | 776 cc [47.4 ci] |
| Power (gross) | 18 hp [13.4 kW] |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Intake valve clearance | 0.005 inches (cold) [0.127 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
| Sparkplug | Champion RS14YC |
Transmission Information of Ingersoll lawn tractors, 4018Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 4018Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Manual steering |
| Open operator station. |
Power Information of Ingersoll lawn tractors, 4018Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | Pulley |
Hydraulics Specifications of Ingersoll lawn tractors, 4018
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Valves | 2 |
| Pump flow | 8 gpm [30.3 lpm] |
Three-Point Hitch of Ingersoll lawn tractors, 4018
Hitch category and rear/front lift capacity.
| Rear Type | 0 |
|---|
Electrical System of Ingersoll lawn tractors, 4018
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 4018 have?
The Ingersoll lawn tractors 4018 delivers 18 HP.
What years was the Ingersoll lawn tractors 4018 produced?
The Ingersoll lawn tractors 4018 was produced in 1989-1992.
What engine does the Ingersoll lawn tractors 4018 have?
The Ingersoll lawn tractors 4018 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 4018 use?
The Ingersoll lawn tractors 4018 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 4018 weigh?
The Ingersoll lawn tractors 4018 weighs 960 lbs [435 kg].
Is the Ingersoll lawn tractors 4018 4WD?
The Ingersoll lawn tractors 4018 is available in 2WD.