Introduction
Production Information of Ingersoll lawn tractors, 4020
The production information of the tractor (4020) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 4020
This section sums up the dimension and tires information of the tractor.
| 4020PS Weight | 805 lbs [365 kg] |
|---|---|
| Wheelbase | 48 inches [121 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 72 inches [182 cm] |
| Clearance (rear axle) | 11 inches [27 cm] |
| 4020 Weight | 765 lbs [347 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Front tread | 33.5 inches [85 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 32x8.00-16 |
Engine Specifications of Ingersoll lawn tractors, 4020
Get the specifications for the engine and if different options are available.
| Onan P220G |
| Air-cooled horizontal-shaft horizontally-opposed |
| 2-cylinder |
| Gasoline |
| Compression | 7:1 |
|---|---|
| Sparkplug | Champion RS14YC |
| Displacement | 781 cc [47.7 ci] |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Power (gross) | 20 hp [14.9 kW] |
| Starter volts | 12 |
| Starter | Electric |
| Exhaust valve clearance | 0.013 inches*Cold [0.330 mm] |
| Intake valve clearance | 0.005 inches*Cold [0.127 mm] |
| Sparkplug gap | 0.025 inches [0.635 mm] |
Transmission Information of Ingersoll lawn tractors, 4020Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Oil change | 500 h |
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 4020Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| 4020 Steering | Manual |
|---|---|
| 4020PS Steering | Power |
Power Information of Ingersoll lawn tractors, 4020Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
| Front PTO Type | Pulley |
Hydraulics Specifications of Ingersoll lawn tractors, 4020
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| 4020 Pump flow | 8 gpm [30.3 lpm] |
| Valves | 2 |
| Pressure | 2100 psi (transmission) [144.8 bar] |
| 4020PS Pump flow | 9.5 gpm [36.0 lpm] |
| 575 psi (lift) [39.6 bar] |
Three-Point Hitch of Ingersoll lawn tractors, 4020
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|
Electrical System of Ingersoll lawn tractors, 4020
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery CCA | 300 |
| Charging volts | 12 |
| Charging system | Flywheel alternator |
| Battery volts | 12 |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 4020 have?
The Ingersoll lawn tractors 4020 delivers 20 HP.
What years was the Ingersoll lawn tractors 4020 produced?
The Ingersoll lawn tractors 4020 was produced in 1989-2004.
What engine does the Ingersoll lawn tractors 4020 have?
The Ingersoll lawn tractors 4020 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 4020 use?
The Ingersoll lawn tractors 4020 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 4020 weigh?
The Ingersoll lawn tractors 4020 weighs 805 lbs [365 kg].
Is the Ingersoll lawn tractors 4020 4WD?
The Ingersoll lawn tractors 4020 is available in 2WD.