Introduction
Production Information of Ingersoll lawn tractors, 4120
The production information of the tractor (4120) includes details about its manufacturing.
| Garden tractor |
| Built in Winneconne, Wisconsin, USA |
| Manufacturer | Ingersoll |
|---|
Dimension and Tires Information of Ingersoll lawn tractors, 4120
This section sums up the dimension and tires information of the tractor.
| Ground clearance | 11 inches [27 cm] |
|---|---|
| Wheelbase | 48 inches [121 cm] |
| Height (hood) | 38.5 inches [97 cm] |
| Height (steering wheel) | 43.5 inches [110 cm] |
| Length | 72 inches [182 cm] |
| Front tread | 33.5 inches [85 cm] |
| Weight | 723 lbs [327 kg] |
| Width | 41 inches [104 cm] |
| Rear tread | 31.5 inches [80 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 8.00-16 |
Engine Specifications of Ingersoll lawn tractors, 4120
Get the specifications for the engine and if different options are available.
| Onan P220G |
| Air-cooled horizontal-shaft horizontally-opposed |
| Gasoline |
| 2-cylinder |
| Power (gross) | 20 hp [14.9 kW] |
|---|---|
| Displacement | 781 cc [47.7 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Ingersoll lawn tractors, 4120Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Hy-Drive |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of Ingersoll lawn tractors, 4120Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. |
| Power steering |
| Mechanical band brakes |
Power Information of Ingersoll lawn tractors, 4120Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
No data available
Hydraulics Specifications of Ingersoll lawn tractors, 4120
Hydraulic system type, pressure, pump flow and valves.
| Steering flow | 2.25 gpm [8.5 lpm] |
|---|---|
| Type | Open center |
| Pump flow | 9.5 gpm [36.0 lpm] |
| Rear valves | 2 |
| Capacity | 1.5 gal [5.7 L] |
| Steering press. | 720 psi [49.6 bar] |
| Total flow | 13.75 gpm [52.0 lpm] |
| Pressure | 2800 psi [193.1 bar] |
Electrical System of Ingersoll lawn tractors, 4120
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 300 |
| Charging system | Flywheel alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the Ingersoll lawn tractors 4120 have?
The Ingersoll lawn tractors 4120 delivers 20 HP.
What years was the Ingersoll lawn tractors 4120 produced?
The Ingersoll lawn tractors 4120 was produced in 1992-1993.
What engine does the Ingersoll lawn tractors 4120 have?
The Ingersoll lawn tractors 4120 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Ingersoll lawn tractors 4120 use?
The Ingersoll lawn tractors 4120 uses a Hy-Drive transmission.
How much does the Ingersoll lawn tractors 4120 weigh?
The Ingersoll lawn tractors 4120 weighs 723 lbs [327 kg].
Is the Ingersoll lawn tractors 4120 4WD?
The Ingersoll lawn tractors 4120 is available in 2WD.