J.I. Case lawn tractors 130
Power
10 hp
Production
1965
Engine
1-cylinder
Transmission
Hydra-Static
Drive
2WD
From the same series:
Introduction
J.I. Case 130 Garden Tractor
The J.I. Case 130 is a garden tractor produced in 1965 in Winneconne, Wisconsin, USA. Designed for residential and light maintenance tasks, this model serves as a representative of mid-1960s American small-utility machinery.
Engine and Performance
The tractor is powered by a 1-cylinder, air-cooled engine with a displacement of 391 cc (23.9 ci). It delivers 10 horsepower (7.5 kW) at a rated speed of 3600 RPM. The engine utilizes a 12-volt starter system.
Transmission and Drivetrain
The J.I. Case 130 features a Hydra-Static hydraulic drive transmission. This system provides infinite forward and reverse speed control across two ranges, allowing for precise maneuverability during operation. It is configured as a two-wheel-drive unit.
Chassis and Dimensions
The machine is built with a 46-inch (116 cm) wheelbase and features a 26-inch tread width for both front and rear axles. It is equipped with turf-specific tires, measuring 16x6.50-8 on the front and 23x9.5-12 on the rear, suitable for lawn maintenance. The tractor utilizes manual steering and features an open operator station.
Conclusion
The J.I. Case 130 is a compact garden tractor suited for lawn care and light garden management. Its combination of a hydrostatic transmission and a 10 hp engine provides a straightforward, functional solution for users requiring maneuverability and ease of operation in a small-scale maintenance environment.
Production Information of J.I. Case lawn tractors, 130
- Garden tractor
- Built in Winneconne, Wisconsin, USA
| Manufacturer | J.I. Case |
|---|
Dimension and Tires Information of J.I. Case lawn tractors, 130
| Wheelbase | 46 inches [116 cm] |
|---|---|
| Front tread | 26 inches [66 cm] |
| Rear tread | 26 inches [66 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x9.5-12 |
Engine Specifications of J.I. Case lawn tractors, 130
- Air-cooled
- Image courtesy of Bradley Tatro
- 1-cylinder
| Power (gross) | 10 hp [7.5 kW] |
|---|---|
| Displacement | 391 cc [23.9 ci] |
| Rated RPM | 3600 |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Starter volts | 12 |
Transmission Information of J.I. Case lawn tractors, 130
Transmission variants 1
| Transmission | Hydra-Static |
|---|---|
| Type | Hydraulic drive |
| Gears | Infinite forward and reverse (2-range) |
Mechanical Specs of J.I. Case lawn tractors, 130
- Two-wheel drive
- Open operator station.
| Steering | Manual |
|---|
Electrical System of J.I. Case lawn tractors, 130
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
Its power puts it in the 87th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the J.I. Case lawn tractors 130 have?
The J.I. Case lawn tractors 130 delivers 10 HP.
What years was the J.I. Case lawn tractors 130 produced?
The J.I. Case lawn tractors 130 was produced in 1965.
What engine does the J.I. Case lawn tractors 130 have?
The J.I. Case lawn tractors 130 is powered by a 1-cylinder engine.
What transmission does the J.I. Case lawn tractors 130 use?
The J.I. Case lawn tractors 130 uses a Hydra-Static transmission.
Is the J.I. Case lawn tractors 130 4WD?
The J.I. Case lawn tractors 130 is available in 2WD.