Introduction
John Deere F910: Technical Reference
The John Deere F910 is a front-mount mower tractor produced between 1984 and 1990 in Horicon, Wisconsin. Designed primarily for professional turf maintenance, this two-wheel-drive machine is built for maneuverability and consistent performance in landscaping applications.
Engine and Powertrain
The F910 is powered by an air-cooled, horizontal-shaft opposed twin-cylinder gasoline engine with a displacement of 781 cc (47.7 ci). It produces 20 hp (14.9 kW) and 33.4 lb-ft (45.3 Nm) of torque at 2700 RPM. The engine utilizes a dry air cleaner and is supported by a 12-volt electrical system featuring a flywheel alternator with 20-amp charging capacity.
Transmission and PTO
The tractor is equipped with a hydrostatic transmission, providing infinite forward and reverse gears for precise speed control. It features an independent front PTO driven by an electric clutch, allowing for seamless engagement of front-mounted implements such as the 50-inch or 60-inch mower decks.
Chassis and Controls
Built on a 49-inch wheelbase, the F910 features power steering and drum brakes to assist the operator. The mechanical front differential lock enhances traction during operation. The machine is configured with an open operator station, with a Roll-Over Protective Structure (ROPS) available as an option. The unit has an operating weight of 900 lbs (408 kg).
Conclusion
The John Deere F910 is a specialized front-mount tractor engineered for efficient grass cutting and turf management. Its combination of a hydrostatic transmission, power steering, and independent front PTO makes it suitable for commercial or large-scale private property maintenance.
Production Information of John Deere, F910
- Front-mount mower
- Built in Horicon, Wisconsin, USA
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, F910
| Wheelbase | 49 inches [124 cm] |
|---|---|
| Height (ROPS) | 81 inches [205 cm] |
| Height (steering wheel) | 47 inches [119 cm] |
| Length | 78 inches [198 cm] |
| Weight | 900 lbs [408 kg] |
| Width | 43 inches [109 cm] |
| Lawn/turf front | 20x8.00-10 |
|---|---|
| Lawn/turf rear | 15x6.00-6 |
Engine Specifications of John Deere, F910
- Air-cooled horizontal-shaft opposed twin
- Gasoline
- 2-cylinder
| Starter | Electric |
|---|---|
| Displacement | 781 cc [47.7 ci] |
| Air cleaner | Dry |
| Bore/Stroke | 3.25x2.875 inches [83 x 73 mm] |
| Oil capacity | 2 qts [1.9 L] |
| Starter volts | 12 |
| Torque RPM | 2700 |
| Torque | 33.4 lb-ft [45.3 Nm] |
| Power | 20 hp [14.9 kW] |
Transmission Information of John Deere, F910
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse |
| Oil capacity | 4.6 qts [4.4 L] |
Mechanical Specs of John Deere, F910
- Two-wheel drive
- Open operator station. ROPS available.
- Drum brakes
- Power steering
| Differential lock | Mechanical front |
|---|
Power Information of John Deere, F910
| Front PTO | Independent |
|---|---|
| Clutch | Electric |
Electrical System of John Deere, F910
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Charging system | Flywheel alternator |
| Charging amps | 20 |
Where it sits
Its power puts it in the 98th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the John Deere F910 have?
The John Deere F910 delivers 20 HP.
What years was the John Deere F910 produced?
The John Deere F910 was produced in 1984-1990.
What engine does the John Deere F910 have?
The John Deere F910 is powered by a Gasoline, 2-cylinder engine.
What transmission does the John Deere F910 use?
The John Deere F910 uses a Hydrostatic transmission.
How much does the John Deere F910 weigh?
The John Deere F910 weighs 900 lbs [408 kg].
Is the John Deere F910 4WD?
The John Deere F910 is available in 2WD.