Introduction
Production Information of John Deere, X495
The production information of the tractor (X495) includes details about its manufacturing.
| Original price was $11,199 in 2002 |
| Garden tractor |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X495
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 54.5 inches [138 cm] |
|---|---|
| 2WS Weight | 1000 lbs [453 kg] |
| Height | 50 inches [127 cm] |
| Length | 78.8 inches [200 cm] |
| AWS Weight | 1060 lbs [480 kg] |
| Width | 46.8 inches [118 cm] |
| Lawn/turf front | 18x8.5-8 |
|---|---|
| Lawn/turf rear | 26x12-12 |
Engine Specifications of John Deere, X495
Get the specifications for the engine and if different options are available.
| Yanmar 3TNV76 |
| Liquid-cooled horizontal-shaft inline |
| 3-cylinder |
| The diesel Yanmar 3TNV76 diesel engine was used in 2005, starting at serial number 040001. |
| Diesel |
| Coolant capacity | 3.0 qts [2.8 L] |
|---|---|
| Oil capacity | 2.25 qts [2.1 L] |
| Power | 24 hp [17.9 kW] |
| Compression | 23.4:1 |
| Air cleaner | Dual paper element |
| Bore/Stroke | 3.0x3.0 inches [76 x 76 mm] |
| Fuel system | Mechanical indirect injection |
| Displacement | 1116 cc [68.1 ci] |
| Starter power | 1.61 hp [1.2 kW] |
| Starter volts | 12 |
| Rated RPM | 3425 |
Transmission Information of John Deere, X495Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission operator with dual foot pedals. Cruise control on dashboard. |
| Low-viscosity HY-GARD | |
| Transmission | Tuff Torq K92 |
| 6 qts (X495 AWS) [5.7 L] | |
| Oil capacity | 7 qts [6.6 L] |
| Type | Shaft-driven hydrostatic |
| Oil type | Low-viscosity HY-GARD |
| Gears | Infinite forward and reverse |
Transmission variants 2
| 6 | Cruise control |
|---|---|
| 4 | Reverse |
| 3 | Forward |
| 1 | Throttle |
| 7 | Differential lock |
| 5 | Parking brake |
| 2 | Brake |
Mechanical Specs of John Deere, X495Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Integral wet disc brakes |
| Open operator station. Optional hard and soft-sided cabs. Optional vinyl weather enclosure. |
| Four-wheel steering on AWS | |
| Differential lock | Mechanical rear |
| Steering | Hydrostatic power |
Power Information of John Deere, X495Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Clutch | Electric |
| Rear PTO Type | 540 |
| Mid PTO | Independent |
Three-Point Hitch of John Deere, X495
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|---|
| 1-limited OptOptional | |
| Rear lift | 450 lbs [204 kg] |
Electrical System of John Deere, X495
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere X495 have?
The John Deere X495 delivers 24 HP.
What years was the John Deere X495 produced?
The John Deere X495 was produced in 2002-2005.
What engine does the John Deere X495 have?
The John Deere X495 is powered by a The diesel Yanmar 3TNV76 diesel engine was used in 2005, starting at serial number 040001., 3-cylinder engine.
What transmission does the John Deere X495 use?
The John Deere X495 uses a Tuff Torq K92 transmission.
How much does the John Deere X495 weigh?
The John Deere X495 weighs 1000 lbs [453 kg].
Is the John Deere X495 4WD?
The John Deere X495 is available in 2WD.