John Deere X485
Power
25 hp
Production
2002-2005
Engine
Gasoline, 2-cylinder
Transmission
Tuff Torq K92
Weight
845 lbs [383 kg]
Drive
2WD
From the same series:
Introduction
Production Information of John Deere, X485
The production information of the tractor (X485) includes details about its manufacturing.
| Original price was $9,999 in 2002 |
| Garden tractor |
| Built in Horicon, Wisconsin, USA |
| Manufacturer | John Deere |
|---|
Dimension and Tires Information of John Deere, X485
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 54.5 inches [138 cm] |
|---|---|
| 2WS Weight | 845 lbs [383 kg] |
| Height | 50 inches [127 cm] |
| Length | 78.8 inches [200 cm] |
| AWS Weight | 905 lbs [410 kg] |
| Width | 46.8 inches [118 cm] |
| Lawn/turf front | 18x8.5-8 |
|---|---|
| 2WS Lawn/turf rear | 26x12-12 |
| AWS Lawn/turf rear | 26x10.5-12 |
Engine Specifications of John Deere, X485
Get the specifications for the engine and if different options are available.
| Liquid-cooled horizontal-shaft V-Twin |
| Gasoline |
| 2-cylinder |
| Oil change | 50 h |
|---|---|
| Fuel system | Fuel injected |
| Air cleaner | Dual paper element |
| Rated RPM | 3550 |
| Compression | 8.0:1 |
| Displacement | 745 cc [45.5 ci] |
| Power (gross) | 25 hp [18.6 kW] |
| Bore/Stroke | 3.07x3.07 inches [78 x 78 mm] |
| Oil capacity | 2.1 qts [2.0 L] |
| Starter power | 1.07 hp [0.8 kW] |
| Starter volts | 12 |
Transmission Information of John Deere, X485Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Hydrostatic transmission operator with dual foot pedals. Cruise control on dashboard. |
| Low-viscosity HY-GARD | |
| Transmission | Tuff Torq K92 |
| AWS Oil capacity | 6 qts [5.7 L] |
| 2WS Oil capacity | 7 qts [6.6 L] |
| Type | Shaft-driven hydrostatic |
| Oil type | Low-viscosity HY-GARD |
| Gears | Infinite forward and reverse |
Transmission variants 2
| 6 | Cruise control |
|---|---|
| 4 | Reverse |
| 3 | Forward |
| 1 | Throttle |
| 7 | Differential lock |
| 5 | Parking brake |
| 2 | Brake |
Mechanical Specs of John Deere, X485Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Integral wet disc brakes |
| Open operator station. Optional hard and soft-sided cabs. Optional vinyl weather enclosure. |
| Four-wheel steering on AWS | |
| Differential lock | Mechanical rear |
| Steering | Hydrostatic power |
Power Information of John Deere, X485Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent OptOptional |
|---|---|
| Clutch | Electric |
| Rear PTO Type | 540 |
| Mid PTO | Independent |
Three-Point Hitch of John Deere, X485
Hitch category and rear/front lift capacity.
| Rear Type | 0 OptOptional |
|---|---|
| 1-limited OptOptional | |
| Rear lift | 450 lbs [204 kg] |
Electrical System of John Deere, X485
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 340 |
| Charging system | Alternator |
| Charging amps | 20 |
Frequently asked questions
How much horsepower does the John Deere X485 have?
The John Deere X485 delivers 25 HP.
What years was the John Deere X485 produced?
The John Deere X485 was produced in 2002-2005.
What engine does the John Deere X485 have?
The John Deere X485 is powered by a Gasoline, 2-cylinder engine.
What transmission does the John Deere X485 use?
The John Deere X485 uses a Tuff Torq K92 transmission.
How much does the John Deere X485 weigh?
The John Deere X485 weighs 845 lbs [383 kg].
Is the John Deere X485 4WD?
The John Deere X485 is available in 2WD.