Massey Ferguson lawn tractors 2927H
Power
27 hp
Production
2004-2010
Engine
Gasoline, 2-cylinder
Transmission
Tuff Torq K92
Weight
830 lbs [376 kg]
Drive
2WD
From the same series:
Introduction
Production Information of Massey Ferguson lawn tractors, 2927H
The production information of the tractor (2927H) includes details about its manufacturing.
| The Massey Ferguson 2927H is the same as a Simplicity Legacy XL and the AGCO 2027H. |
| Distributor | Massey Ferguson |
|---|---|
| Manufacturer | Simplicity |
Dimension and Tires Information of Massey Ferguson lawn tractors, 2927H
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 55 inches [139 cm] |
|---|---|
| Weight | 830 lbs [376 kg] |
| Height | 51 inches [129 cm] |
| Length | 81 inches [205 cm] |
| Width | 44.75 inches [113 cm] |
| Lawn/turf front | 18x8.5-8 |
|---|---|
| Lawn/turf rear | 26x12.0-12 |
Engine Specifications of Massey Ferguson lawn tractors, 2927H
Get the specifications for the engine and if different options are available.
| Kohler CH740 |
| Air-cooled horizontal-shaft V-Twin |
| Gasoline |
| 2-cylinder |
| Power (gross) | 27 hp [20.1 kW] |
|---|---|
| Displacement | 725 cc [44.24 ci] |
| Starter | Electric |
| Bore/Stroke | 3.27x2.64 inches [83 x 67 mm] |
| Oil capacity | 2.1 qts [2.0 L] |
| Starter volts | 12 |
Transmission Information of Massey Ferguson lawn tractors, 2927HY
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Oil change | 250 h |
|---|---|
| Transmission | Tuff Torq K92 |
| Oil type | Type F ATF |
| Oil capacity | 8 qts [7.6 L] |
| Type | Shaft-driven hydrostatic |
| Type F ATF | |
| Gears | Infinite forward and reverse |
Mechanical Specs of Massey Ferguson lawn tractors, 2927HY
This section summarizes all mechanical information such as the brake system and other specifications.
| Two-wheel drive |
| Open operator station. ROPS optional. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Massey Ferguson lawn tractors, 2927HY
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Mid PTO | Independent |
|---|---|
| Mid PTO Type | 2000 |
Hydraulics Specifications of Massey Ferguson lawn tractors, 2927H
Hydraulic system type, pressure, pump flow and valves.
| Pressure | 300 psi [20.7 bar] |
|---|---|
| Pump flow | 5.1 gpm [19.3 lpm] |
Three-Point Hitch of Massey Ferguson lawn tractors, 2927H
Hitch category and rear/front lift capacity.
| Rear Type | I (limited) |
|---|---|
| Rear lift (at 24"/610mm) | 350 lbs [158 kg] |
Electrical System of Massey Ferguson lawn tractors, 2927H
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 15 |
Frequently asked questions
How much horsepower does the Massey Ferguson lawn tractors 2927H have?
The Massey Ferguson lawn tractors 2927H delivers 27 HP.
What years was the Massey Ferguson lawn tractors 2927H produced?
The Massey Ferguson lawn tractors 2927H was produced in 2004-2010.
What engine does the Massey Ferguson lawn tractors 2927H have?
The Massey Ferguson lawn tractors 2927H is powered by a Gasoline, 2-cylinder engine.
What transmission does the Massey Ferguson lawn tractors 2927H use?
The Massey Ferguson lawn tractors 2927H uses a Tuff Torq K92 transmission.
How much does the Massey Ferguson lawn tractors 2927H weigh?
The Massey Ferguson lawn tractors 2927H weighs 830 lbs [376 kg].
Is the Massey Ferguson lawn tractors 2927H 4WD?
The Massey Ferguson lawn tractors 2927H is available in 2WD.