Simplicity 725
Power
7 hp
Production
1961-1964
Engine
Gasoline, 1-cylinder
Transmission
Shaft-driven gear
Drive
2WD
From the same series:
Introduction
Simplicity 725 Garden Tractor
The Simplicity 725 is a garden tractor produced between 1961 and 1964 in Port Washington, Wisconsin, USA. It served as a compact, motorized solution for lawn maintenance and light agricultural tasks during the early 1960s.
Engine and Performance
The tractor is powered by a Briggs & Stratton 19 engine. This is an air-cooled, single-cylinder gasoline engine with a displacement of 304 cc (18.56 ci) and a bore-to-stroke ratio of 76 x 67 mm. It delivers a gross power output of 7.25 hp (5.4 kW). The engine utilizes an oiled foam air cleaner and features a 12-volt electric starting system.
Transmission and Drivetrain
The drivetrain consists of a shaft-driven gear transmission, which provides the operator with three forward gears and one reverse gear. The tractor utilizes a two-wheel drive configuration, managed via manual steering, suitable for the intended garden applications of its era.
Dimensions and Equipment
The Simplicity 725 features a wheelbase of 111 cm (44 inches) and a total width of 66 cm (26 inches). It is equipped with lawn and turf tires, measuring 4.80x8 at the front and 6.00x12 at the rear, designed to minimize surface damage during operation. The machine supports a 32-inch or 42-inch mower deck for grass cutting purposes.
Conclusion
The Simplicity 725 is a straightforward, mechanically simple garden tractor designed for residential landscaping. Its robust construction and ease of operation make it a representative model of mid-20th-century American garden machinery, well-suited for light mowing and utility work.
Production Information of Simplicity, 725
- Garden tractor
- Built in Port Washington, Wisconsin, USA
| Manufacturer | Simplicity |
|---|
Dimension and Tires Information of Simplicity, 725
| Wheelbase | 44 inches [111 cm] |
|---|---|
| Width | 26 inches [66 cm] |
| Lawn/turf front | 4.80x8 |
|---|---|
| Lawn/turf rear | 6.00x12 |
Engine Specifications of Simplicity, 725
- Briggs & Stratton 19
- Air-cooled horizontal-shaft
- Gasoline
- 1-cylinder
| Power (gross) | 7.25 hp [5.4 kW] |
|---|---|
| Displacement | 304 cc [18.56 ci] |
| Air cleaner | Oiled foam |
| Bore/Stroke | 3.00x2.625 inches [76 x 67 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of Simplicity, 725
Transmission variants 1
| Type | Shaft-driven gear |
|---|---|
| Gears | 3 forward and 1 reverse |
Mechanical Specs of Simplicity, 725
- Two-wheel drive
- Manual steering
- Open operator station.
Electrical System of Simplicity, 725
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 7 HP, the Simplicity 725 sits just below Landlord 9HP (9 HP) in Simplicity's range. Its power puts it in the 66th percentile of 1960s models in our database (550 machines).
Frequently asked questions
How much horsepower does the Simplicity 725 have?
The Simplicity 725 delivers 7 HP.
What years was the Simplicity 725 produced?
The Simplicity 725 was produced in 1961-1964.
What engine does the Simplicity 725 have?
The Simplicity 725 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Simplicity 725 use?
The Simplicity 725 uses a Shaft-driven gear transmission.
Is the Simplicity 725 4WD?
The Simplicity 725 is available in 2WD.