Snapper lawn tractors 25063
Power
6 hp
Production
1979-1982
Engine
Gasoline, 1-cylinder
Transmission
Friction disc
Drive
2WD
From the same series:
Introduction
Snapper 25063 Riding Lawn Mower
The Snapper 25063 is a riding lawn mower manufactured in McDonough, Georgia, USA. Produced between 1979 and 1982, this model belongs to a series of compact lawn maintenance equipment designed for residential turf care.
Engine and Power
The machine is powered by a 6 hp (4.5 kW) single-cylinder gasoline engine. It features an air-cooled vertical-shaft configuration. Starting is managed via a manual recoil starter, with an optional electric start system available for improved convenience. The electrical system operates on 12 volts with a negative ground.
Transmission and Drivetrain
The transmission utilizes a friction disc design, providing 5 forward gears and 1 reverse gear to allow for varied operating speeds. The tractor is configured with two-wheel drive and manual steering to assist with maneuverability in lawn environments.
Mowing and PTO
The unit is equipped with a 25-inch mowing deck. It features an independent mid-mounted power take-off (PTO) system that utilizes a pulley-type drive and a manual clutch, allowing for the operation of compatible implements.
Chassis and Tires
The mower is designed with an open operator station. It utilizes lawn and turf tires to minimize ground disturbance, specifically 10.50x3.50-4 tires on the front and 16x4.80-8 tires on the rear.
Conclusion
The Snapper 25063 is a specialized riding mower intended for standard residential lawn maintenance. Its simple mechanical construction and compact design make it a functional tool for basic turf care tasks.
Production Information of Snapper lawn tractors, 25063
- Riding lawn mower
- Built in McDonough, Georgia, USA
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, 25063
| Lawn/turf front | 10.50x3.50-4 |
|---|---|
| Lawn/turf rear | 16x4.80-8 |
Engine Specifications of Snapper lawn tractors, 25063
- Gasoline
- 1-cylinder
- Air-cooled vertical-shaft
| Starter volts | 12 |
|---|---|
| Starter | Manual recoil |
| Power (gross) | 6 hp [4.5 kW] |
| Power (gross)(optional) | Electric |
Transmission Information of Snapper lawn tractors, 25063
Transmission variants 1
| Type | Friction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Snapper lawn tractors, 25063
- Two-wheel drive
- Manual steering
- Open operator station.
Power Information of Snapper lawn tractors, 25063
| Mid PTO | Independent |
|---|---|
| Clutch | Manual |
| Mid PTO Type | Pulley |
Electrical System of Snapper lawn tractors, 25063
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 6 HP, the Snapper lawn tractors 25063 sits just above 2550 (5 HP) in Snapper lawn tractors's range. Its power puts it in the 13th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors 25063 have?
The Snapper lawn tractors 25063 delivers 6 HP.
What years was the Snapper lawn tractors 25063 produced?
The Snapper lawn tractors 25063 was produced in 1979-1982.
What engine does the Snapper lawn tractors 25063 have?
The Snapper lawn tractors 25063 is powered by a Gasoline, 1-cylinder engine.
What transmission does the Snapper lawn tractors 25063 use?
The Snapper lawn tractors 25063 uses a Friction disc transmission.
Is the Snapper lawn tractors 25063 4WD?
The Snapper lawn tractors 25063 is available in 2WD.