Snapper lawn tractors 2550
Power
5 hp
Production
1978-1979
Engine
1-cylinder
Transmission
Fiction disc
Drive
2WD
Introduction
Snapper 2550 Riding Lawn Mower
The Snapper 2550 is a riding lawn mower produced between 1978 and 1979 in McDonough, Georgia, USA. Designed primarily for residential landscaping, this compact machine offers a basic, functional approach to lawn maintenance.
Engine and Power
The tractor is equipped with a 5 hp (3.7 kW) single-cylinder, air-cooled engine featuring a vertical shaft design. Ignition is managed via a manual recoil starter system, consistent with the mechanical simplicity of the era.
Transmission and Drivetrain
The 2550 utilizes a friction disc transmission system. It provides the operator with five forward gears and one reverse gear, allowing for speed adjustments during mowing operations. The unit operates on a two-wheel drive configuration.
Mechanical and Dimensions
Featuring manual steering and an open operator station, the machine emphasizes mechanical directness. It measures 62 inches in length and 38 inches in height. For ground engagement, it is fitted with specialized lawn and turf tires, sized 4.10/3.50-4 at the front and 16x4.80-8 at the rear, designed to minimize soil compaction.
Mowing Equipment
The mower is configured with a 25-inch cutting deck, intended for residential lawn care tasks. At the time of its release in 1979, the unit was marketed with an original retail price of $680.
Conclusion
The Snapper 2550 is a compact, entry-level riding mower suitable for small to medium-sized residential lawns. Its manual operation and simple mechanical design make it a representative example of late 1970s lawn care equipment.
Production Information of Snapper lawn tractors, 2550
- Original price was $680 in 1979
- Riding lawn mower
- Built in McDonough, Georgia, USA
| Manufacturer | Snapper |
|---|
Dimension and Tires Information of Snapper lawn tractors, 2550
| Length | 62 inches [157 cm] |
|---|---|
| Height | 38 inches [96 cm] |
| Lawn/turf front | 4.10/3.50-4 |
|---|---|
| Lawn/turf rear | 16x4.80-8 |
Engine Specifications of Snapper lawn tractors, 2550
- Air-cooled vertical-shaft
- Image courtesy of Darin Palmer
- 1-cylinder
| Power (gross) | 5 hp [3.7 kW] |
|---|---|
| Starter type | Manual recoil |
Transmission Information of Snapper lawn tractors, 2550
Transmission variants 1
| Type | Fiction disc |
|---|---|
| Gears | 5 forward and 1 reverse |
Mechanical Specs of Snapper lawn tractors, 2550
- Two-wheel drive
- Manual steering
- Open operator station.
Where it sits
With 5 HP, the Snapper lawn tractors 2550 sits between 304R (4 HP) and 25063 (6 HP) in Snapper lawn tractors's range. Its power puts it in the 10th percentile of 1970s models in our database (1008 machines).
Frequently asked questions
How much horsepower does the Snapper lawn tractors 2550 have?
The Snapper lawn tractors 2550 delivers 5 HP.
What years was the Snapper lawn tractors 2550 produced?
The Snapper lawn tractors 2550 was produced in 1978-1979.
What engine does the Snapper lawn tractors 2550 have?
The Snapper lawn tractors 2550 is powered by a 1-cylinder engine.
What transmission does the Snapper lawn tractors 2550 use?
The Snapper lawn tractors 2550 uses a Fiction disc transmission.
Is the Snapper lawn tractors 2550 4WD?
The Snapper lawn tractors 2550 is available in 2WD.