Introduction
Wheel Horse 418-C Garden Tractor
The Wheel Horse 418-C is a garden tractor produced in 1987 in South Bend, Indiana, by Wheel Horse, a division of Toro. Positioned as an enhanced version of the 418-A model, it was engineered for property maintenance and garden management tasks.
Engine and Powertrain
The 418-C is powered by a Kohler M18QS gasoline engine. This 2-cylinder, air-cooled unit features a horizontal shaft and a displacement of 691 cc (42.18 ci), producing 18 hp (13.4 kW). The engine utilizes an electric 12-volt starter system for reliable ignition.
Transmission and Handling
The tractor utilizes an Eaton 1100 belt-driven hydrostatic transmission. This system provides infinite forward and reverse speed control, allowing for precise maneuverability during operation. It is configured with a two-wheel drive system and manual steering.
Physical Specifications and Design
The machine features an open operator station designed for visibility. It rests on a 45.5-inch (115 cm) wheelbase, with an overall length of 65 inches (165 cm) and a width of 40 inches (101 cm). The unit has a shipping weight of 757 lbs (343 kg) and is equipped with lawn/turf tires, specifically 16x6.50-8 on the front and 23x10.50-12 on the rear. This model is compatible with a 60-inch mower deck.
Model Distinctions
Compared to the standard 418-A model, the 418-C variant includes factory upgrades such as a refined seat and a reinforced front axle. It is distinguished by the absence of hood louvers and chrome hub caps.
Conclusion
The Wheel Horse 418-C serves as a durable garden tractor suitable for property owners requiring a versatile machine for mowing and general utility tasks, characterized by its robust build and operator-focused enhancements.
Production Information of Wheel Horse, 418-C
- The commercial 418-C was similar to the 418-A but offered an upgraded seat and front axle. It did not have the hood louvers or the chrome hub caps.
- Garden tractor
- Built in South Bend, Indiana, USA
| Manufacturer | Wheel Horse (a part of Toro) |
|---|
Dimension and Tires Information of Wheel Horse, 418-C
| Wheelbase | 45.5 inches [115 cm] |
|---|---|
| Shipping weight | 757 lbs [343 kg] |
| Length | 65 inches [165 cm] |
| Width | 40 inches [101 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Wheel Horse, 418-C
- Kohler M18QS
- Air-cooled horizontal-shaft
- Gasoline
- 2-cylinder
| Power | 18 hp [13.4 kW] |
|---|---|
| Displacement | 691 cc [42.18 ci] |
| Starter | Electric |
| Bore/Stroke | 3.125x2.75 inches [79 x 70 mm] |
| Starter volts | 12 |
Transmission Information of Wheel Horse, 418-C
Transmission variants 1
| Transmission | Eaton 1100 |
|---|---|
| Type | Belt-driven hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Wheel Horse, 418-C
- Two-wheel drive
- Manual steering
- Open operator station.
Electrical System of Wheel Horse, 418-C
| Ground | Negative |
|---|---|
| Charging amps | 15 |
| Battery volts | 12 |
Where it sits
With 18 HP, the Wheel Horse 418-C sits between C-175 (17 HP) and 269-H (19 HP) in Wheel Horse's range. Its power puts it in the 93th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Wheel Horse 418-C have?
The Wheel Horse 418-C delivers 18 HP.
What years was the Wheel Horse 418-C produced?
The Wheel Horse 418-C was produced in 1987.
What engine does the Wheel Horse 418-C have?
The Wheel Horse 418-C is powered by a Gasoline, 2-cylinder engine.
What transmission does the Wheel Horse 418-C use?
The Wheel Horse 418-C uses a Eaton 1100 transmission.
How much does the Wheel Horse 418-C weigh?
The Wheel Horse 418-C weighs 757 lbs [343 kg].
Is the Wheel Horse 418-C 4WD?
The Wheel Horse 418-C is available in 2WD.