Introduction
Wheel Horse GT-1848 Garden Tractor
The Wheel Horse GT-1848 is a garden tractor produced in South Bend, Indiana, USA, between 1982 and 1983. Designed for residential lawn care and grounds maintenance, this two-wheel-drive machine represents the era's standard for compact utility tractors.
Engine and Powertrain
The tractor is powered by a 2-cylinder, air-cooled Briggs & Stratton 422437 gasoline engine. It produces 18 hp (13.4 kW) from a displacement of 658 cc (40.15 ci). The engine features a bore/stroke ratio of 3.44x2.16 inches (87x55 mm) and relies on a 12-volt starter system for ignition.
Transmission and Handling
The GT-1848 utilizes an Eaton 1100 hydrostatic transmission, which provides infinite forward and reverse speed control without the need for manual gear shifting. Steering is managed through a manual system, paired with a two-wheel-drive configuration to navigate standard lawn environments.
Equipment and Hydraulics
The machine is equipped with an independent front Power Take-Off (PTO) system, engaged via a manual clutch. This configuration allows for the operation of front-mounted attachments, including the standard 48-inch mower deck intended for efficient grass cutting.
Dimensions and Chassis
The tractor features an open operator station and sits on a 45.5-inch (115 cm) wheelbase. With a total length of 66 inches (167 cm) and a height of 41 inches (104 cm), the unit weighs approximately 750 lbs (340 kg). It is fitted with turf-specific tires, measuring 16x6.50-8 at the front and 23x10.50-12 at the rear, to minimize ground compaction.
Conclusion
The Wheel Horse GT-1848 is a robust, hydrostatic-driven garden tractor suited for landowners requiring a versatile machine for mowing and light-duty grounds maintenance tasks.
Production Information of Wheel Horse, GT-1848
- Garden tractor
- Built in South Bend, Indiana, USA
| Manufacturer | Wheel Horse |
|---|
Dimension and Tires Information of Wheel Horse, GT-1848
| Wheelbase | 45.5 inches [115 cm] |
|---|---|
| Weight | 750 lbs [340 kg] |
| Length | 66 inches [167 cm] |
| Height | 41 inches [104 cm] |
| Lawn/turf front | 16x6.50-8 |
|---|---|
| Lawn/turf rear | 23x10.50-12 |
Engine Specifications of Wheel Horse, GT-1848
- Briggs & Stratton 422437
- Air-cooled
- Gasoline
- 2-cylinder
| Power | 18 hp [13.4 kW] |
|---|---|
| Displacement | 658 cc [40.15 ci] |
| Starter volts | 12 |
| Bore/Stroke | 3.44x2.16 inches [87 x 55 mm] |
Transmission Information of Wheel Horse, GT-1848
Transmission variants 1
| Transmission | Eaton 1100 |
|---|---|
| Type | Hydrostatic |
| Gears | Infinite forward and reverse |
Mechanical Specs of Wheel Horse, GT-1848
- Two-wheel drive
- Open operator station.
| Steering | Manual |
|---|
Power Information of Wheel Horse, GT-1848
| Front PTO | Independent |
|---|---|
| Clutch | Manual |
Electrical System of Wheel Horse, GT-1848
| Ground | Negative |
|---|---|
| Battery volts | 12 |
Where it sits
With 18 HP, the Wheel Horse GT-1848 sits just above GT-1642 (16 HP) in Wheel Horse's range. Its power puts it in the 93th percentile of 1980s models in our database (977 machines).
Frequently asked questions
How much horsepower does the Wheel Horse GT-1848 have?
The Wheel Horse GT-1848 delivers 18 HP.
What years was the Wheel Horse GT-1848 produced?
The Wheel Horse GT-1848 was produced in 1982-1983.
What engine does the Wheel Horse GT-1848 have?
The Wheel Horse GT-1848 is powered by a Gasoline, 2-cylinder engine.
What transmission does the Wheel Horse GT-1848 use?
The Wheel Horse GT-1848 uses a Eaton 1100 transmission.
How much does the Wheel Horse GT-1848 weigh?
The Wheel Horse GT-1848 weighs 750 lbs [340 kg].
Is the Wheel Horse GT-1848 4WD?
The Wheel Horse GT-1848 is available in 2WD.