Introduction
Production Information of AGCO Allis, 8765
The production information of the tractor (8765) includes details about its manufacturing.
| Utility tractor |
| Built in Beauvais, France |
| $51,490 (1998 shuttle 4WD cab ) | |
| Manufacturer | AGCO Allis (a part of AGCO) |
| $43,590 (1998 shuttle 4WD ROPS ) | |
| Original price | $39,408 (1998 gear 4WD ROPS ) |
| $47,308 (1998 gear 4WD cab ) |
Dimension and Tires Information of AGCO Allis, 8765
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Wheelbase | 99 inches [251 cm] |
|---|---|
| 2WD ROPS Weight | 6820 lbs [3093 kg] |
| Height (cab) | 103 inches [261 cm] |
| Length | 165 inches [419 cm] |
| 2WD Front tread | 60 to 88 inches [152 to 223 cm] |
| 4WD Cab Weight | 8700 lbs [3946 kg] |
| Width | 83 inches*Minimum width. [210 cm] |
| 16.9-38 | |
| Ag front | 9.5L-15 |
| 13.6-24 | |
| 12.4R24 | |
| 10-11-16 | |
| 14.9-34 | |
| 14.9-24 | |
| 11-00-16 | |
| 18.4-34 | |
| 16.9-34 | |
| Ag rear | 18.4R30 |
Engine Specifications of AGCO Allis, 8765
Get the specifications for the engine and if different options are available.
| Cummins B3.9T |
| Liquid-cooled inline |
| Turbocharged diesel |
| 4-cylinder |
| Compression | 16.5:1 |
|---|---|
| Displacement | 239 ci [3.9 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.02x4.72 inches [102 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO Allis, 8765Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Partially synchronized |
|---|---|
| Gears | 12 forward and 4 reverse |
Transmission variants 2
| Type | Synchronized shuttle |
|---|---|
| Gears | 12 forward and reverse |
Transmission variants 3
| Type | Power shuttle |
|---|---|
| Gears | 24 forward and reverse |
| 12-speed partially synchronized |
| 12-speed synchronized shuttle |
| 24-speed power shuttle |
Mechanical Specs of AGCO Allis, 8765Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Two-post folding ROPS. Cab with air-conditioning. |
| Final drives | Outboard planetary |
|---|---|
| Differential lock | Electro-hydraulic rear |
Power Information of AGCO Allis, 8765Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of AGCO Allis, 8765
Hydraulic system type, pressure, pump flow and valves.
| 17.9 gpm*Combined flow by locking out three-point hitch. [67.8 lpm] | |
| Type | Open center |
| 7 gpm (hitch) [26.5 lpm] | |
| Pump flow | 10 gpm (remotes) [37.9 lpm] |
| Pressure | 3045 psi [210.0 bar] |
| Total flow | 25.8 gpm [97.7 lpm] |
| SCV flow | 10 gpm [37.9 lpm] |
| Valves | 2 or 3 |
| Steering flow | 7.9 gpm [29.9 lpm] |
Three-Point Hitch of AGCO Allis, 8765
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| 6200 lbsOptOptional [2812 kg] | |
| Control | Electronic draft sensing |
| Rear lift (at 24"/610mm) | 4100 lbs [1859 kg] |
Electrical System of AGCO Allis, 8765
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO Allis 8765 have?
The AGCO Allis 8765 delivers 94 hp[P] HP.
What years was the AGCO Allis 8765 produced?
The AGCO Allis 8765 was produced in 1998-1999.
What engine does the AGCO Allis 8765 have?
The AGCO Allis 8765 is powered by a Turbocharged diesel, 4-cylinder engine.
What transmission does the AGCO Allis 8765 use?
The AGCO Allis 8765 uses a Partially synchronized transmission.
How much does the AGCO Allis 8765 weigh?
The AGCO Allis 8765 weighs 6820 lbs [3093 kg].
Is the AGCO Allis 8765 4WD?
The AGCO Allis 8765 is available in 2WD/4WD.