Introduction
Production Information of AGCO Allis, 7600
The production information of the tractor (7600) includes details about its manufacturing.
| Original price was $36,000 in 1996 |
| Built in Italy |
| Row-Crop tractor |
| Distributor | AGCO Allis (a part of AGCO) |
|---|---|
| Manufacturer | SLH |
Dimension and Tires Information of AGCO Allis, 7600
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| 4WD Front tread | 64 to 76 inches [162 to 193 cm] |
|---|---|
| 2WD Wheelbase | 104.6 inches [265 cm] |
| Width | 84 inches [213 cm] |
| 4WD Length | 171.2 inches [434 cm] |
| 4WD Wheelbase | 104 inches [264 cm] |
| 4WD Ground clearance | 18.4 inches [46 cm] |
| Height (exhaust) | 110 inches [279 cm] |
| 2WD Length | 168.2 inches [427 cm] |
| Rear tread | 61 to 85.2 inches [154 to 216 cm] |
| 2WD Front tread | 60 to 80 inches [152 to 203 cm] |
| 2WD Ground clearance | 17.6 inches [44 cm] |
| 2WD Standard tires (ag) | Front: 10.00-16. Rear: 16.9R34 |
|---|---|
| 4WD Standard tires (ag) | Front: 14.9R24. Rear: 16.9R34 |
Engine Specifications of AGCO Allis, 7600
Get the specifications for the engine and if different options are available.
| SLH 1055-P |
| Air-cooled inline |
| 5-cylinder |
| Diesel |
| Oil capacity | 14.3 qts [13.5 L] |
|---|---|
| Starter power | 4.7 hp [3.5 kW] |
| Fuel system | Direct injection |
| Rated RPM | 2180 |
| Compression | 17:1 |
| Displacement | 317 ci [5.2 L] |
| Power | 95.2 hp [71.0 kW] |
| Air cleaner | Dual dry element |
| Bore/Stroke | 4.13x4.72 inches [105 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Idle RPM | 650-2374 |
Transmission Information of AGCO Allis, 7600Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (L/M/H) with additional two-speed high-low shift. |
| Type | Synchromesh |
|---|---|
| Oil capacity | 92.6 qts [87.6 L] |
| Gears | 24 forward and 12 reverse |
| Clutch | Hydraulic dry 350mm disc |
Mechanical Specs of AGCO Allis, 7600Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Four-post ROPS. Cab optional with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical |
Power Information of AGCO Allis, 7600Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2125 | |
| Engine RPM | 540@1957 |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of AGCO Allis, 7600
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 16.9 gpm [64.0 lpm] |
| Valves | 2 |
| Capacity | 23.1 gal [87.4 L] |
| Pressure | 2610 psi [180.0 bar] |
Three-Point Hitch of AGCO Allis, 7600
Hitch category and rear/front lift capacity.
| Rear Type | II/I |
|---|---|
| Control | Lower link draft control |
| Rear lift (at ends) | 10141 lbs [4599 kg] |
Electrical System of AGCO Allis, 7600
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Cab Charging amps | 65 |
| Charging system | Alternator |
| Battery AH | 120 |
| ROPS Charging amps | 55 |
Frequently asked questions
How much horsepower does the AGCO Allis 7600 have?
The AGCO Allis 7600 delivers 95 HP.
What years was the AGCO Allis 7600 produced?
The AGCO Allis 7600 was produced in 1991-1996.
What engine does the AGCO Allis 7600 have?
The AGCO Allis 7600 is powered by a Diesel, 5-cylinder engine.
What transmission does the AGCO Allis 7600 use?
The AGCO Allis 7600 uses a Synchromesh transmission.
Is the AGCO Allis 7600 4WD?
The AGCO Allis 7600 is available in 2WD/4WD.