AGCO Allis 7630
Power
122 hp
Production
1991-1992
Engine
Diesel, 6-cylinder
Transmission
Synchromesh
Weight
11398 lbs [5170 kg]
Drive
4WD
From the same series:
Introduction
Production Information of AGCO Allis, 7630
The production information of the tractor (7630) includes details about its manufacturing.
| Original price was $60,000 in 1992 |
| Built in Italy |
| Row-Crop tractor |
| Distributor | AGCO Allis (a part of AGCO) |
|---|---|
| Manufacturer | SLH |
Dimension and Tires Information of AGCO Allis, 7630
This section sums up the dimension and tires information of the tractor.
| Flange rear axle |
| Ground clearance | 21.6 inches [54 cm] |
|---|---|
| Wheelbase | 110 inches [279 cm] |
| Shipping weight | 11398 lbs [5170 kg] |
| Height (exhaust) | 118.4 inches [300 cm] |
| Length | 176.8 inches [449 cm] |
| Max weight | 17857 lbs [8099 kg] |
| Width | 86.8 inches [220 cm] |
| Rear tread | 63.8 to 88.4 inches [162 to 224 cm] |
| Front tread | 64 to 80 inches [162 to 203 cm] |
| Standard tires (ag) | Front: 14.9R30. Rear: 18.4R38 |
|---|---|
| Optional tires (ag) | Front: 16.9R30. Rear: 20.8R38 |
Engine Specifications of AGCO Allis, 7630
Get the specifications for the engine and if different options are available.
| SLH 1056-P |
| Air-cooled |
| Diesel |
| 6-cylinder |
| Oil capacity | 17.1 qts [16.2 L] |
|---|---|
| Air cleaner | Dual dry element |
| Compression | 17:1 |
| Idle RPM | 650-2440 |
| Rated RPM | 2260 |
| Displacement | 380.48 ci [6.2 L] |
| Power | 122.2 hp [91.1 kW] |
| Bore/Stroke | 4.13x4.72 inches [105 x 120 mm] |
| Starter power | 4.7 hp [3.5 kW] |
| Starter volts | 12 |
| Starter | Electric |
Transmission Information of AGCO Allis, 7630Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four gears (1-4) in three ranges (L/M/H) with additional two-speed high-low shift. |
| Type | Synchromesh |
|---|---|
| Oil capacity | 102.9 qts [97.4 L] |
| Gears | 24 forward and 12 reverse |
| Clutch | Hydraulic cerametallic 350mm disc |
Mechanical Specs of AGCO Allis, 7630Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Mechanical front and rear |
Power Information of AGCO Allis, 7630Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| 1000@2286 | |
| Engine RPM | 540@2083 |
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of AGCO Allis, 7630
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Pump flow | 16.9 gpm [64.0 lpm] |
| Valves | 2 |
| Capacity | 23.1 gal [87.4 L] |
| Pressure | 2610 psi [180.0 bar] |
Three-Point Hitch of AGCO Allis, 7630
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Control | Lower link draft control |
| Rear lift (at ends) | 11905 lbs [5400 kg] |
Electrical System of AGCO Allis, 7630
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery AH | 143 |
| Battery volts | 12 |
| Charging system | Alternator |
| Charging amps | 65 |
Frequently asked questions
How much horsepower does the AGCO Allis 7630 have?
The AGCO Allis 7630 delivers 122 HP.
What years was the AGCO Allis 7630 produced?
The AGCO Allis 7630 was produced in 1991-1992.
What engine does the AGCO Allis 7630 have?
The AGCO Allis 7630 is powered by a Diesel, 6-cylinder engine.
What transmission does the AGCO Allis 7630 use?
The AGCO Allis 7630 uses a Synchromesh transmission.
How much does the AGCO Allis 7630 weigh?
The AGCO Allis 7630 weighs 11398 lbs [5170 kg].
Is the AGCO Allis 7630 4WD?
The AGCO Allis 7630 is available in 4WD.