AGCO Allis 8785
Power
122 hp[P] hp
Production
1998-1999
Engine
Diesel, 6-cylinder
Transmission
Quadrashift
Drive
2WD/4WD
From the same series:
Introduction
Production Information of AGCO Allis, 8785
The production information of the tractor (8785) includes details about its manufacturing.
| Row-Crop tractor |
| Built in Beauvais, France |
| $67,856 ( 4WD Cab ) | |
| Manufacturer | AGCO Allis (a part of AGCO) |
| $59,117 (1998 2WD Cab ) | |
| Original price | $47,048 (1998 2WD ROPS ) |
| $55,502 ( 4WD ROPS ) |
Dimension and Tires Information of AGCO Allis, 8785
This section sums up the dimension and tires information of the tractor.
| 2WD Front tread | 60 to 88 inches [152 to 223 cm] |
|---|---|
| Wheelbase | 112.6 inches [286 cm] |
| Bar rear axle | 3.25 by 88 inches [82 by 2235 mm] |
| Height (cab) | 109 inches [276 cm] |
| Length | 173 inches [439 cm] |
| Bar rear axle | 3.25 by 113 inches [82 by 2870 mm] |
| Width | 88 inches*Minimum width [223 cm] |
| Ag front | 11.00-16 |
|---|---|
| Ag rear | 18.4R38 |
Engine Specifications of AGCO Allis, 8785
Get the specifications for the engine and if different options are available.
| Cummins B5.9T |
| Liquid-cooled |
| Diesel |
| 6-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 359 ci [5.9 L] |
| Rated RPM | 2200 |
| Bore/Stroke | 4.02x4.72 inches [102 x 120 mm] |
| Starter volts | 12 |
| Starter | Electric |
| Compression | 16.5:1 |
Transmission Information of AGCO Allis, 8785Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Transmission | Quadrashift |
|---|---|
| Clutch | Wet disc |
| Type | Four-speed power shift |
| Gears | 32 forward and reverse |
Mechanical Specs of AGCO Allis, 8785Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. Two-post fixed ROPS available. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic rear |
Power Information of AGCO Allis, 8785Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 (1.375) |
Hydraulics Specifications of AGCO Allis, 8785
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| SCV flow | 27.7 gpm [104.8 lpm] |
| Pump flow | 27.7 gpm [104.8 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 2 or 3 |
Three-Point Hitch of AGCO Allis, 8785
Hitch category and rear/front lift capacity.
| Rear Type | II |
|---|---|
| Control | Electronic draft sensing |
| Rear lift (at 24"/610mm) | 9000 lbs [4082 kg] |
Electrical System of AGCO Allis, 8785
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 590 |
| Charging system | Alternator |
| Batteries | 2 |
Frequently asked questions
How much horsepower does the AGCO Allis 8785 have?
The AGCO Allis 8785 delivers 122 hp[P] HP.
What years was the AGCO Allis 8785 produced?
The AGCO Allis 8785 was produced in 1998-1999.
What engine does the AGCO Allis 8785 have?
The AGCO Allis 8785 is powered by a Diesel, 6-cylinder engine.
What transmission does the AGCO Allis 8785 use?
The AGCO Allis 8785 uses a Quadrashift transmission.
Is the AGCO Allis 8785 4WD?
The AGCO Allis 8785 is available in 2WD/4WD.