AGCO Allis 9190
Power
214 hp[P] hp
Production
1991-1992
Engine
Turbocharged diesel, 6-cylinder
Transmission
Three-speed power shift
Weight
16600 lbs [7529 kg]
Drive
4WD
From the same series:
Introduction
Production Information of AGCO Allis, 9190
The production information of the tractor (9190) includes details about its manufacturing.
| Original price was $90,200 in 1992 |
| Built in Coldwater, Ohio, USA |
| Row-Crop tractor |
| Distributor | AGCO Allis |
|---|---|
| Manufacturer | White |
Dimension and Tires Information of AGCO Allis, 9190
This section sums up the dimension and tires information of the tractor.
| Bar rear axle | 3.875 by 96 inches [98 by 2438 mm] |
|---|---|
| Wheelbase | 115 inches [292 cm] |
| Height (exhaust) | 120 inches [304 cm] |
| Height (cab) | 121 inches [307 cm] |
| Length | 200 inches [508 cm] |
| Bar rear axle | 3.875 by 115 inches [98 by 2921 mmOptOptional] |
| Weight | 16600 lbs [7529 kg] |
| Width | 96 inches*Width over standard axle. [243 cm] |
| Rear tread | 62 to 102 inches [157 to 259 cm] |
| Front tread | 61 to 87 inches [154 to 220 cm] |
| Standard tires (ag) | Front: 16.9R28. Rear: 20.8R38 |
|---|
Engine Specifications of AGCO Allis, 9190
Get the specifications for the engine and if different options are available.
| Deutz BF6L513R |
| Air-cooled |
| Turbocharged diesel |
| 6-cylinder |
| Compression | 15.8:1 |
|---|---|
| Displacement | 584 ci [9.6 L] |
| Rated RPM | 2300 |
| Bore/Stroke | 4.92x5.12 inches [125 x 130 mm] |
| Oil capacity | 23.5 qts [22.2 L] |
| Starter volts | 12 |
Transmission Information of AGCO Allis, 9190Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Six forward gears, each with a three-speed power shift. |
| Type | Three-speed power shift |
|---|---|
| Gears | 18 forward and 6 reverse |
| Clutch | 330mm dry disc |
Mechanical Specs of AGCO Allis, 9190Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic rear |
Power Information of AGCO Allis, 9190Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 1000 (1.75) |
| Engine RPM | 1000@2168 |
Hydraulics Specifications of AGCO Allis, 9190
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 24 gpm [90.8 lpm] |
| Pressure | 2500 psi [172.4 bar] |
| Valves | 2 or 3 |
Three-Point Hitch of AGCO Allis, 9190
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Control | Position and draft control |
| Rear lift (at ends) | 9898 lbs [4489 kg] |
Electrical System of AGCO Allis, 9190
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Batteries | 2 |
| Charging system | Alternator |
| Charging amps | 105 |
Frequently asked questions
How much horsepower does the AGCO Allis 9190 have?
The AGCO Allis 9190 delivers 214 hp[P] HP.
What years was the AGCO Allis 9190 produced?
The AGCO Allis 9190 was produced in 1991-1992.
What engine does the AGCO Allis 9190 have?
The AGCO Allis 9190 is powered by a Turbocharged diesel, 6-cylinder engine.
What transmission does the AGCO Allis 9190 use?
The AGCO Allis 9190 uses a Three-speed power shift transmission.
How much does the AGCO Allis 9190 weigh?
The AGCO Allis 9190 weighs 16600 lbs [7529 kg].
Is the AGCO Allis 9190 4WD?
The AGCO Allis 9190 is available in 4WD.