AGCO Allis 9170 tractor

AGCO Allis 9170

Power

192 hp[P] hp

Production

1991-1992

Engine

Turbocharged diesel, 6-cylinder

Transmission

Three-speed power shift

Weight

16000 lbs [7257 kg]

Drive

2WD/4WD

From the same series:

9150
9190

Introduction

Production Information of AGCO Allis, 9170

The production information of the tractor (9170) includes details about its manufacturing.

Original price was $68,000 in 1992
Built in Coldwater, Ohio, USA
Row-Crop tractor
DistributorAGCO Allis
ManufacturerWhite

Dimension and Tires Information of AGCO Allis, 9170

This section sums up the dimension and tires information of the tractor.

4WD Front tread61 to 87 inches [154 to 220 cm]
2WD Wheelbase119 inches [302 cm]
Height (cab)121 inches [307 cm]
Width96 inches*Width over standard axle. [243 cm]
4WD Wheelbase115 inches [292 cm]
Bar rear axle3.875 by 96 inches [98 by 2438 mm]
Height (exhaust)120 inches [304 cm]
Length200 inches [508 cm]
Rear tread62 to 102 inches [157 to 259 cm]
2WD Front tread60 to 80 inches [152 to 203 cm]
Bar rear axle3.875 by 115 inches [98 by 2921 mmOptOptional]
Weight16000 lbs [7257 kg]
2WD Standard tires (ag)Front: 11.00-16. Rear: 18.4R38
4WD Standard tires (ag)Front: 14.9R28. Rear: 18.4R38

Engine Specifications of AGCO Allis, 9170

Get the specifications for the engine and if different options are available.

Deutz BF6L513R
Air-cooled
Turbocharged diesel
6-cylinder
Compression15.8:1
Displacement584 ci [9.6 L]
Rated RPM2300
Bore/Stroke4.92x5.12 inches [125 x 130 mm]
Oil capacity23.5 qts [22.2 L]
Starter volts12

Transmission Information of AGCO Allis, 9170Y

Discover all variants of transmission available for this tractor model.

Transmission variants 1

Six forward gears, each with a three-speed power shift.
TypeThree-speed power shift
Gears18 forward and 6 reverse
Clutch330mm dry disc

Mechanical Specs of AGCO Allis, 9170Y

This section summarizes all mechanical information such as the brake system and other specifications.

Two- or four-wheel drive
Hydraulic wet disc brakes
Power steering
Cab standard with air-conditioning.
Final drivesInboard planetary
Differential lockElectro-hydraulic rear

Power Information of AGCO Allis, 9170Y

Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.

Rear PTOIndependent
Rear PTO Type1000 (1.75)
Engine RPM1000@2168

Hydraulics Specifications of AGCO Allis, 9170

Hydraulic system type, pressure, pump flow and valves.

TypeClosed center
Pump flow24 gpm [90.8 lpm]
Pressure2500 psi [172.4 bar]
Valves2 or 3

Three-Point Hitch of AGCO Allis, 9170

Hitch category and rear/front lift capacity.

Rear TypeIII/II
88746 lbsOptOptional [40255 kg]
ControlPosition and draft control
Rear lift (at ends)7628 lbs [3460 kg]

Electrical System of AGCO Allis, 9170

Battery voltage, charging system and ground.

GroundNegative
Battery volts12
Batteries2
Charging systemAlternator
Charging amps105

Frequently asked questions

How much horsepower does the AGCO Allis 9170 have?

The AGCO Allis 9170 delivers 192 hp[P] HP.

What years was the AGCO Allis 9170 produced?

The AGCO Allis 9170 was produced in 1991-1992.

What engine does the AGCO Allis 9170 have?

The AGCO Allis 9170 is powered by a Turbocharged diesel, 6-cylinder engine.

What transmission does the AGCO Allis 9170 use?

The AGCO Allis 9170 uses a Three-speed power shift transmission.

How much does the AGCO Allis 9170 weigh?

The AGCO Allis 9170 weighs 16000 lbs [7257 kg].

Is the AGCO Allis 9170 4WD?

The AGCO Allis 9170 is available in 2WD/4WD.

Compare the AGCO Allis 9170 with another model