AGCO Allis 9650
Power
172 hp[P] hp
Production
1994-1995
Engine
Turbocharged intercooled diesel, 6-cylinder
Transmission
Full power shift
Drive
2WD/4WD
From the same series:
Introduction
AGCO Allis 9650 Row-Crop Tractor
The AGCO Allis 9650 is a row-crop tractor produced between 1994 and 1995. Designed for heavy-duty agricultural operations, this machine offers a balance of mechanical power and operator comfort within the 9600 series lineup.
Engine and Performance
The tractor is powered by a Deutz BF6L913C 6-cylinder diesel engine. This 6.1-liter unit features turbocharging and intercooling, with an air-cooled design and an ether injection system for cold-start assistance. It operates at a rated speed of 2400 RPM, delivering 172 horsepower.
Transmission and Drivetrain
The 9650 utilizes a full power shift transmission providing 18 forward and 9 reverse gears. Power is transferred via a hydraulic wet disc clutch, ensuring smooth transitions under load. The machine is available in both two-wheel and four-wheel drive configurations, featuring inboard planetary final drives and an electro-hydraulic rear differential lock.
Hydraulics and Hitch
The hydraulic system is a closed-center, pressure-compensating design operating at 2250 psi (155.1 bar). It delivers a pump flow of 24 gpm (90.8 lpm) and supports 3 or 4 rear valves. The rear hitch is a Category III/II system equipped with lower-link draft sensing, capable of handling significant implement weight.
Operator Environment and Mechanical Features
The tractor comes standard with an air-conditioned cab. Maneuverability is supported by power steering and hydraulic wet disc brakes. Electrical power is supplied by a 12-volt system utilizing dual batteries.
Conclusion
With its robust Deutz engine, high-capacity hydraulic system, and power shift transmission, the AGCO Allis 9650 is engineered for demanding row-crop farming tasks requiring consistent performance and reliability.
Production Information of AGCO Allis, 9650
- Row-Crop tractor
- Original price was $77,000 in 1995
| Manufacturer | AGCO Allis (a part of AGCO) |
|---|
Dimension and Tires Information of AGCO Allis, 9650
| 2WD Wheelbase | 124 inches [314 cm] |
|---|---|
| Rear tread | 62 to 126 inches [157 to 320 cm] |
| 4WD Length | 196.5 inches [499 cm] |
| 4WD Clearance (front axle) | 22.3 inches [56 cm] |
| Clearance (drawbar) | 15.5 inches [39 cm] |
| Bar rear axle | 3.875 by 115 inches [98 by 2921 mm] |
| Bar rear axle | 3.875 by 96 inches [98 by 2438 mm] |
| Width | 96 inches [243 cm] |
| 4WD Wheelbase | 116.5 inches [295 cm] |
| 2WD Clearance (front axle) | 23 inches [58 cm] |
| 2WD Length | 187.5 inches [476 cm] |
| Height (cab) | 119.7 inches [304 cm] |
| Rear tread | 62 to 107.1 inches [157 to 272 cm] |
| 4WD Front tread | 59.7 to 91.4 inches [151 to 232 cm] |
| 2WD Front tread | 65 to 89 inches [165 to 226 cm] |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 |
|---|---|
| 4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Engine Specifications of AGCO Allis, 9650
- Deutz BF6L913C
- Air-cooled
- Turbocharged intercooled diesel
- 6-cylinder
| Oil capacity | 17 qts [16.1 L] |
|---|---|
| Displacement | 374 ci [6.1 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 4.02x4.92 inches [102 x 125 mm] |
| Starter volts | 12 |
| Rated RPM | 2400 |
| Pre-heating | Ether injection |
Transmission Information of AGCO Allis, 9650
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 9 reverse |
| Clutch | Hydraulic wet disc |
Mechanical Specs of AGCO Allis, 9650
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Power steering
- Cab standard with air-conditioning.
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic rear |
Power Information of AGCO Allis, 9650
| Rear PTO | Independent |
|---|---|
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of AGCO Allis, 9650
| Type | Closed center pressure-compensating |
|---|---|
| Pump flow | 24 gpm [90.8 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Rear valves | 3 or 4 |
Claimed. During testing, actual flow was 22.5 GPM.
Three-Point Hitch of AGCO Allis, 9650
| Rear Type | III/II |
|---|---|
| Rear Type(optional) | 8544 lbs [3875 kg] |
| Control | Lower-link draft sensing |
| Rear lift (at 24"/610mm) | 7212 lbs [3271 kg] |
Claimed lift with optional assist cylinder. During testing, actual lift was 6962 pounds.
During testing, actual lift was 5913 pounds.
Electrical System of AGCO Allis, 9650
| Ground | Negative |
|---|---|
| Battery CCA | 580 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 105 |
Where it sits
With 172 hp[P] HP, the AGCO Allis 9650 sits between 9630 (150 HP) and 9670 (194 HP) in AGCO Allis's range. Its power puts it in the 89th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the AGCO Allis 9650 have?
The AGCO Allis 9650 delivers 172 hp[P] HP.
What years was the AGCO Allis 9650 produced?
The AGCO Allis 9650 was produced in 1994-1995.
What engine does the AGCO Allis 9650 have?
The AGCO Allis 9650 is powered by a Turbocharged intercooled diesel, 6-cylinder engine.
What transmission does the AGCO Allis 9650 use?
The AGCO Allis 9650 uses a Full power shift transmission.
Is the AGCO Allis 9650 4WD?
The AGCO Allis 9650 is available in 2WD/4WD.