AGCO Allis 9630
Power
150 hp[P] hp
Production
1993-1995
Engine
Turbocharged intercooled diesel, 6-cylinder
Transmission
Full power shift
Drive
2WD/4WD
From the same series:
Introduction
AGCO Allis 9630 Row-Crop Tractor
The AGCO Allis 9630 is a row-crop tractor produced between 1993 and 1995. Designed for large-scale agricultural operations, this machine offers a rated power of 150 horsepower, positioning it as a robust solution for heavy-duty field work.
Engine and Performance
The tractor is powered by a 6-cylinder Deutz BF6L913C turbocharged and intercooled diesel engine. With a displacement of 6.1 liters, this air-cooled unit operates at a rated speed of 2400 RPM. The engine cooling system relies on air rather than liquid, a characteristic design of the Deutz powerplant used in this series.
Transmission and Drivetrain
The 9630 features a full power shift transmission providing 18 forward and 9 reverse gears, allowing for precise speed adjustments without manual clutching. It is equipped with a hydraulic wet disc clutch. The tractor is available in both two-wheel and four-wheel drive configurations, featuring inboard planetary final drives and an electro-hydraulic rear differential lock to improve traction in varied soil conditions.
Hydraulics and Hitch
Equipped with a closed-center pressure-compensating hydraulic system, the tractor delivers a pump flow of 24 gallons per minute (90.8 lpm) at 2250 psi. The rear hitch is a Category III/II type, utilizing lower-link draft sensing for implement control. It offers a lift capacity of approximately 7212 lbs (3271 kg) at 24 inches behind the lift point, with optional assist cylinders available to increase this capacity.
Operator Environment and Dimensions
The operator station includes a standard cab equipped with air-conditioning to ensure comfort during long working hours. The 4WD version has a wheelbase of 116.5 inches and provides a ground clearance of 22.5 inches under the front axle. The machine incorporates hydraulic wet disc brakes and power steering to assist with maneuverability.
Conclusion
The AGCO Allis 9630 is a high-capacity row-crop tractor suited for intensive agricultural tasks. Its combination of a high-torque air-cooled engine, full power shift transmission, and flexible hydraulic configuration makes it a reliable choice for farmers requiring consistent power for primary tillage and heavy implement operation.
Production Information of AGCO Allis, 9630
- Row-Crop tractor
- Original price was $72,000 in 1995
| Manufacturer | AGCO Allis (a part of AGCO) |
|---|
Dimension and Tires Information of AGCO Allis, 9630
| 2WD Wheelbase | 124 inches [314 cm] |
|---|---|
| Rear tread | 62 to 126 inches [157 to 320 cm] |
| 4WD Length | 196.5 inches [499 cm] |
| 4WD Clearance (front axle) | 22.5 inches [57 cm] |
| Clearance (drawbar) | 15.5 inches [39 cm] |
| Bar rear axle | 3.875 by 115 inches [98 by 2921 mm] |
| Bar rear axle | 3.875 by 96 inches [98 by 2438 mm] |
| Width | 96 inches [243 cm] |
| 4WD Wheelbase | 116.5 inches [295 cm] |
| 2WD Clearance (front axle) | 23 inches [58 cm] |
| 2WD Length | 187.5 inches [476 cm] |
| Height (cab) | 119.7 inches [304 cm] |
| Rear tread | 62 to 107.1 inches [157 to 272 cm] |
| 4WD Front tread | 59.7 to 91.4 inches [151 to 232 cm] |
| 2WD Front tread | 65 to 89 inches [165 to 226 cm] |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 |
|---|---|
| 4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Engine Specifications of AGCO Allis, 9630
- Deutz BF6L913C
- Air-cooled
- Turbocharged intercooled diesel
- 6-cylinder
| Oil capacity | 17 qts [16.1 L] |
|---|---|
| Displacement | 374 ci [6.1 L] |
| Compression | 15.5:1 |
| Bore/Stroke | 4.02x4.92 inches [102 x 125 mm] |
| Starter volts | 12 |
| Rated RPM | 2400 |
| Pre-heating | Ether injection |
Transmission Information of AGCO Allis, 9630
Transmission variants 1
| Type | Full power shift |
|---|---|
| Gears | 18 forward and 9 reverse |
| Clutch | Hydraulic wet disc |
Mechanical Specs of AGCO Allis, 9630
- Two- or four-wheel drive
- Hydraulic wet disc brakes
- Power steering
- Cab standard with air-conditioning.
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic rear |
Power Information of AGCO Allis, 9630
| Rear PTO | Independent |
|---|---|
| Clutch | Hydraulic wet disc |
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of AGCO Allis, 9630
| Type | Closed center pressure-compensating |
|---|---|
| Pump flow | 24 gpm [90.8 lpm] |
| Pressure | 2250 psi [155.1 bar] |
| Rear valves | 3 or 4 |
Advertised. Flow during testing was 22.6 GPM.
Three-Point Hitch of AGCO Allis, 9630
| Rear Type | III/II |
|---|---|
| Rear Type(optional) | 8544 lbs [3875 kg] |
| Control | Lower-link draft sensing |
| Rear lift (at 24"/610mm) | 7212 lbs [3271 kg] |
Claimed lift with optional assist cylinder. During testing, actual lift was 6962 pounds.
During testing, actual lift was 5913 pounds.
Electrical System of AGCO Allis, 9630
| Ground | Negative |
|---|---|
| Battery CCA | 580 |
| Batteries | 2 |
| Charging system | Alternator |
| Battery volts | 12 |
| Charging amps | 105 |
Where it sits
With 150 hp[P] HP, the AGCO Allis 9630 sits just below 9650 (172 HP) in AGCO Allis's range. Its power puts it in the 85th percentile of 1990s models in our database (2097 machines).
Frequently asked questions
How much horsepower does the AGCO Allis 9630 have?
The AGCO Allis 9630 delivers 150 hp[P] HP.
What years was the AGCO Allis 9630 produced?
The AGCO Allis 9630 was produced in 1993-1995.
What engine does the AGCO Allis 9630 have?
The AGCO Allis 9630 is powered by a Turbocharged intercooled diesel, 6-cylinder engine.
What transmission does the AGCO Allis 9630 use?
The AGCO Allis 9630 uses a Full power shift transmission.
Is the AGCO Allis 9630 4WD?
The AGCO Allis 9630 is available in 2WD/4WD.