AGCO Allis 9130 tractor

AGCO Allis 9130

Power

150 hp[P] hp

Production

1991-1992

Engine

Diesel, 6-cylinder

Transmission

Three-speed power shift

Weight

12300 lbs [5579 kg]

Drive

2WD/4WD

From the same series:

9150

Introduction

AGCO Allis 9130 Row-Crop Tractor

The AGCO Allis 9130 is a row-crop tractor manufactured in Coldwater, Ohio, USA, between 1991 and 1992. Produced by White and marketed under the AGCO Allis brand, this machine was designed for mid-range agricultural operations requiring a balance of power and versatility.

Engine and Performance

The tractor is powered by a 6-cylinder Deutz diesel engine with a displacement of 6.1 liters. This power plant utilizes an air-cooled cooling system and operates at a rated speed of 2400 RPM. The engine generates a power output of 150 horsepower, providing the necessary torque for demanding field tasks.

Transmission and Drivetrain

The 9130 features a transmission system offering 18 forward gears and 6 reverse gears. This setup includes a three-speed power shift for each of the six forward gears, allowing the operator to adjust speed under load without clutching. The machine is available in either two-wheel or four-wheel drive configurations, assisted by hydrostatic power steering to improve maneuverability.

Hydraulics and Hitch

Equipped with a closed-center hydraulic system, the tractor provides a pump flow of 24 gallons per minute (90.8 liters per minute). It features three hydraulic valves to operate various implements. The rear hitch is compatible with category II and III equipment and offers a lift capacity of 7,212 pounds (3,271 kg). The independent rear PTO supports both 540 and 1000 RPM speeds, catering to a wide range of agricultural machinery.

Conclusion

With a weight of 12,300 pounds and a 120-inch wheelbase, the AGCO Allis 9130 provides a stable platform for row-crop applications. Its mechanical configuration and hydraulic performance make it a suitable choice for farmers seeking a rugged, mid-sized tractor from the early 1990s.

Production Information of AGCO Allis, 9130

  • Original price was $62,000 in 1992
  • Built in Coldwater, Ohio, USA
  • Row-Crop tractor
DistributorAGCO Allis
ManufacturerWhite

Dimension and Tires Information of AGCO Allis, 9130

Wheelbase120 inches [304 cm]
Weight12300 lbs [5579 kg]
Ag front11.00-16
Ag rear18.4R38

Engine Specifications of AGCO Allis, 9130

  • Deutz
  • Air-cooled
  • Diesel
  • 6-cylinder
Rated RPM2400
Displacement374 ci [6.1 L]
Starter volts12
Bore/Stroke4.02x4.92 inches [102 x 125 mm]

Transmission Information of AGCO Allis, 9130

Transmission variants 1

  • Six forward gears, each with a three-speed power shift.
TypeThree-speed power shift
Gears18 forward and 6 reverse

Mechanical Specs of AGCO Allis, 9130

  • Two- or four-wheel drive
SteeringHydrostatic power

Power Information of AGCO Allis, 9130

Rear PTOIndependent
Rear PTO Type540, 1000

Hydraulics Specifications of AGCO Allis, 9130

TypeClosed
Valves3
Pump flow24 gpm [90.8 lpm]

Three-Point Hitch of AGCO Allis, 9130

Rear TypeII,III
Rear lift7212 lbs [3271 kg]

Electrical System of AGCO Allis, 9130

GroundNegative
Battery volts12

Where it sits

With 150 hp[P] HP, the AGCO Allis 9130 sits just below 9150 (166 HP) in AGCO Allis's range. Its power puts it in the 85th percentile of 1990s models in our database (2097 machines).

Frequently asked questions

How much horsepower does the AGCO Allis 9130 have?

The AGCO Allis 9130 delivers 150 hp[P] HP.

What years was the AGCO Allis 9130 produced?

The AGCO Allis 9130 was produced in 1991-1992.

What engine does the AGCO Allis 9130 have?

The AGCO Allis 9130 is powered by a Diesel, 6-cylinder engine.

What transmission does the AGCO Allis 9130 use?

The AGCO Allis 9130 uses a Three-speed power shift transmission.

How much does the AGCO Allis 9130 weigh?

The AGCO Allis 9130 weighs 12300 lbs [5579 kg].

Is the AGCO Allis 9130 4WD?

The AGCO Allis 9130 is available in 2WD/4WD.

Compare the AGCO Allis 9130 with another model