AGCO Allis 9435
Power
150 hp[P] hp
Production
1994-1997
Engine
Detroit Diesel 40, 6-cylinder
Transmission
Four-speed power shift
Drive
2WD/4WD
From the same series:
Introduction
Production Information of AGCO Allis, 9435
The production information of the tractor (9435) includes details about its manufacturing.
| Row-Crop tractor |
| Original price was $70,000 in 1997 |
| Manufacturer | AGCO Allis (a part of AGCO) |
|---|
Dimension and Tires Information of AGCO Allis, 9435
This section sums up the dimension and tires information of the tractor.
| Rear tread | 62 to 103 inches [157 to 261 cm] |
|---|---|
| 2WD Wheelbase | 123.2 inches [312 cm] |
| 2WD Front tread | 65 to 89 inches [165 to 226 cm] |
| Rear axle | 118 inch length [2997 mm] |
| 4WD Wheelbase | 116.5 inches [295 cm] |
| Rear tread | 62 to 126 inches [157 to 320 cm (long axle)] |
| 4WD Front tread | 59.7 to 91.4 inches [151 to 232 cm] |
| Rear axle | 98 inch length [2489 mm] |
| 2WD Standard tires (ag) | Front: 11.00-16. Rear: 18.4R38 |
|---|---|
| 4WD Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Engine Specifications of AGCO Allis, 9435
Get the specifications for the engine and if different options are available.
| Detroit Diesel 40 |
| Liquid-cooled inline |
| Turbocharged diesel |
| 6-cylinder |
| Air cleaner | Dual dry element |
|---|---|
| Displacement | 466 ci [7.6 L] |
| Compression | 15.8:1 |
| Bore/Stroke | 4.30x5.35 inches [109 x 136 mm] |
| Starter volts | 12 |
| Rated RPM | 2200 |
Transmission Information of AGCO Allis, 9435Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Four power-shift gears (A-D) in four synchronized ranges (1-4) with additional high-low range shift and synchronized shuttle. |
| Type | Four-speed power shift |
|---|---|
| Gears | 32 forward and reverse |
Mechanical Specs of AGCO Allis, 9435Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Two- or four-wheel drive |
| Hydraulic wet disc brakes |
| Power steering |
| Cab standard with air-conditioning. |
| Final drives | Inboard planetary |
|---|---|
| Differential lock | Electro-hydraulic |
Power Information of AGCO Allis, 9435Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540/1000 |
Hydraulics Specifications of AGCO Allis, 9435
Hydraulic system type, pressure, pump flow and valves.
| Type | Closed center |
|---|---|
| Pump flow | 27 gpm [102.2 lpm] |
| Pressure | 2900 psi [200.0 bar] |
| Valves | 3 or 4 |
Three-Point Hitch of AGCO Allis, 9435
Hitch category and rear/front lift capacity.
| Rear Type | III/II |
|---|---|
| Rear Arms | Extendible lower links |
| Control | Electronic lower-link draft sensing |
| Rear lift (at 24"/610mm) | 10400 lbs [4717 kg] |
Electrical System of AGCO Allis, 9435
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Charging system | Alternator |
| Battery volts | 12 |
Frequently asked questions
How much horsepower does the AGCO Allis 9435 have?
The AGCO Allis 9435 delivers 150 hp[P] HP.
What years was the AGCO Allis 9435 produced?
The AGCO Allis 9435 was produced in 1994-1997.
What engine does the AGCO Allis 9435 have?
The AGCO Allis 9435 is powered by a Detroit Diesel 40, 6-cylinder engine.
What transmission does the AGCO Allis 9435 use?
The AGCO Allis 9435 uses a Four-speed power shift transmission.
Is the AGCO Allis 9435 4WD?
The AGCO Allis 9435 is available in 2WD/4WD.