
Bad Boy 1022
Power
21 hp
Production
2021+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
1433 lbs [650 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Bad Boy, 1022
The production information of the tractor (1022) includes details about its manufacturing.
| Sub-Compact Utility tractor |
| Distributor | Bad Boy |
|---|---|
| Manufacturer | TYM |
Dimension and Tires Information of Bad Boy, 1022
This section sums up the dimension and tires information of the tractor.
| Wheelbase | 53.1 inches [134 cm] |
|---|---|
| Weight | 1433 lbs [650 kg] |
| Height (ROPS) | 86.6 inches [219 cm] |
| Length | 94.2 inches [239 cm] |
| Ground clearance | 8.3 inches [21 cm] |
| Width | 44.5 inches [113 cm] |
| Standard tires (ag) | Front: 16x7.50-9. Rear: 24x12.00-12 |
|---|---|
| Industrial front | 16x7.50-8 |
| Industrial rear | 16x12.00-12 |
Engine Specifications of Bad Boy, 1022
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| 3-cylinder |
| Diesel |
| Fuel system | Indirect injection |
|---|---|
| Starter | Electric |
| Displacement | 60.6 ci [1.0 L] |
| Bore/Stroke | 2.91x3.03 inches [74 x 77 mm] |
| Power (gross) | 21.5 hp [16.0 kW] |
| Rated RPM | 3200 |
| Air cleaner | Dry |
| Coolant capacity | 3.7 qts [3.5 L] |
| Oil capacity | 2.11 qts [2.0 L] |
| Starter volts | 12 |
Transmission Information of Bad Boy, 1022Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (2-range) |
| Oil capacity | 14.2 qts [13.4 L] |
Mechanical Specs of Bad Boy, 1022Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Bad Boy, 1022Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Engine RPM | 2500@3200 |
| Mid PTO | Independent OptOptional |
| Rear PTO Type | 540 (1.375) |
| Engine RPM | 540@3200 |
Hydraulics Specifications of Bad Boy, 1022
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 2.1 gpm [7.9 lpm] |
| Total flow | 6.3 gpm [23.8 lpm] |
| Capacity | 3.6 gal [13.6 L] |
| Pump flow | 4.2 gpm [15.9 lpm] |
Three-Point Hitch of Bad Boy, 1022
Hitch category and rear/front lift capacity.
| Rear Type | IN |
|---|---|
| Control | Position control |
| Rear lift (at 24"/610mm) | 499 lbs [226 kg] |
Electrical System of Bad Boy, 1022
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 500 |
| Charging system | Alternator |
| Charging amps | 40 |
Frequently asked questions
How much horsepower does the Bad Boy 1022 have?
The Bad Boy 1022 delivers 21 HP.
What years was the Bad Boy 1022 produced?
The Bad Boy 1022 was produced in 2021+.
What engine does the Bad Boy 1022 have?
The Bad Boy 1022 is powered by a Diesel, 3-cylinder engine.
What transmission does the Bad Boy 1022 use?
The Bad Boy 1022 uses a Hydrostatic transmission.
How much does the Bad Boy 1022 weigh?
The Bad Boy 1022 weighs 1433 lbs [650 kg].
Is the Bad Boy 1022 4WD?
The Bad Boy 1022 is available in 4WD.