
Bad Boy 4025
Power
24 hp
Production
2021+
Engine
Diesel, 3-cylinder
Transmission
Hydrostatic
Weight
2970 lbs [1347 kg]
Drive
4WD
From the same series:
Introduction
Production Information of Bad Boy, 4025
The production information of the tractor (4025) includes details about its manufacturing.
| Compact Utility tractor |
| Distributor | Bad Boy |
|---|---|
| Manufacturer | TYM |
Dimension and Tires Information of Bad Boy, 4025
This section sums up the dimension and tires information of the tractor.
| Front tread | 47.4 inches [120 cm] |
|---|---|
| Wheelbase | 65.7 inches [166 cm] |
| Weight | 2970 lbs [1347 kg] |
| Height (ROPS) | 96.9 inches [246 cm] |
| Length | 134.9 inches [342 cm] |
| Rear tread | 44.5 inches [113 cm] |
| Ground clearance | 15 inches [38 cm] |
| Width | 56.7 inches [144 cm] |
| Industrial front | 25x8.50-14 |
|---|---|
| Industrial rear | 15-19.5 |
Engine Specifications of Bad Boy, 4025
Get the specifications for the engine and if different options are available.
| Liquid-cooled inline |
| Diesel |
| 3-cylinder |
| Starter volts | 12 |
|---|---|
| Displacement | 104.7 ci [1.7 L] |
| Air cleaner | Dry |
| Bore/Stroke | 3.46x3.70 inches [88 x 94 mm] |
| Coolant capacity | 5.3 qts [5.0 L] |
| Oil capacity | 4.5 qts [4.3 L] |
| Starter | Electric |
| Rated RPM | 2100 |
| Power (gross) | 24.5 hp [18.3 kW] |
Transmission Information of Bad Boy, 4025Y
Discover all variants of transmission available for this tractor model.
Transmission variants 1
| Type | Hydrostatic |
|---|---|
| Gears | Infinite forward and reverse (3-range) |
Mechanical Specs of Bad Boy, 4025Y
This section summarizes all mechanical information such as the brake system and other specifications.
| Four-wheel drive |
| Two-post folding ROPS. |
| Wet disc brakes |
| Power steering |
| Differential lock | Mechanical rear |
|---|
Power Information of Bad Boy, 4025Y
Discover the power specifications and options available for this tractor model but also PTO (Power Take-off) information.
| Rear PTO | Independent |
|---|---|
| Rear PTO Type | 540 (1.375) |
Hydraulics Specifications of Bad Boy, 4025
Hydraulic system type, pressure, pump flow and valves.
| Type | Open center |
|---|---|
| Steering flow | 4 gpm [15.1 lpm] |
| Pump flow | 11.5 gpm [43.5 lpm] |
| Total flow | 7.5 gpm [28.4 lpm] |
Three-Point Hitch of Bad Boy, 4025
Hitch category and rear/front lift capacity.
| Rear Type | I |
|---|---|
| Rear lift (at 24"/610mm) | 1100 lbs [498 kg] |
Electrical System of Bad Boy, 4025
Battery voltage, charging system and ground.
| Ground | Negative |
|---|---|
| Battery volts | 12 |
| Battery CCA | 540 |
| Charging system | Alternator |
| Charging amps | 50 |
Frequently asked questions
How much horsepower does the Bad Boy 4025 have?
The Bad Boy 4025 delivers 24 HP.
What years was the Bad Boy 4025 produced?
The Bad Boy 4025 was produced in 2021+.
What engine does the Bad Boy 4025 have?
The Bad Boy 4025 is powered by a Diesel, 3-cylinder engine.
What transmission does the Bad Boy 4025 use?
The Bad Boy 4025 uses a Hydrostatic transmission.
How much does the Bad Boy 4025 weigh?
The Bad Boy 4025 weighs 2970 lbs [1347 kg].
Is the Bad Boy 4025 4WD?
The Bad Boy 4025 is available in 4WD.